Base plate (individual) for profile cylinders

Base plate (individual) for round cylinders 32 mm Ø. 

Adhesive rubber protection rings (Set - 5 pieces) 

This special tool developed for locksmiths and government agencies allows the easy and hassle-free removal of all types of cylinder locks (profile, round and oval cylinders). The ‘’Bell‘’ enables the door to be opened quickly without damaging the door or the fitting.In combination with the included core pulling plates, the cylinder core alone can be easily extracted from the housing so that the locking mechanism can be actuated without any difficulty. Especially with half cylinders, such as those found on glass doors, garage doors, alarm systems, shutters etc., to save time, deploying the "Bell" is often the only option when it comes to opening the door in an emergency. As the device works with a single and centrally oriented pulling-mechanism, there are no lateral forces during the actual pulling. This prevents the special extraction screws from jamming or snapping.For its compact and robust design and the effective mode of operation, the "Bell" is considered one of the best plug-pulling devices among professionals around the world. The "Bell" is made of hardened steel to ensure years of use.The tension rod is equipped with a hardened trapezoidal thread that enables precise operation and improved load bearing. Compared to the conventional fine thread, this new thread is more durable and allows faster and more precise operation without losing any torque due to the greater thread pitch. Furthermore, the rougher trapezoidal thread is less susceptible to brass shavings.If you should ever need spare parts, just give us a call! We constantly have all spare parts in stock.Care instructions for Multipick Bell (Please pay attention to these instructions!) Just like any other tool, our lock puller "Multipick Bell" also requires care. This means that the ball bearing and the tension rod as well as all moving parts should be kept free of metal shavings after each use and regularly treated with lubricating grease. You can either apply it by means of a brush or, alternatively, using a similar spray grease. 

Repair Kit 2 pieces:Pulling mechanism for Bell "hardened" H45 M12 fine thread & Nut for pulling mechanism M12 fine thread. 

The great advantage of our special QA Pro 2 kit is that all the most important tools are immediately accessible and always by your side. You can turn our special screw into the cylinder core with the Wiha Torx TX-20 screwdriver, or, even easier, with a cordless screwdriver in combination with our SchraubFix bit adapter (both supplied in the set). It's the ultimate set for emergency services and professional locksmiths who always need to keep a cool head in tricky situations.The pulling device QA Pro 2 allows complete door opening in less than 20 seconds! This makes QA Pro 2 the perfect pulling tool for authorities and rescue forces worldwide, since it guarantees a safe, fault-tolerant and simple handling.Functioning:QA Pro 2 is hooked on the VIPER special pull screw which is screwed into the cylinder core. Just a slight lever movement is necessary to break the cylinder. The QA Pro 2 protection jaws avoid scratches on the door surface as well as on the fitting.All sizes of our special pull screws can be used with QA Pro 2. The QA Pro 2 is a quality tool from Germany, which has been constructed for a lifetime application in the professional environment. Since the tool works almost maintenance and wear-free, it is predestined for applications with authorities and rescue forces.Dimensions:Length (max. stretched): 455 mmLength (max. angled): 385 mmTube height: 30 mmTube width: 20 mmClamping height: 40 mmClamping width: 20 mmWeight: approx. 2.2 kgCase dimension: 395 x 310 x 105 mm 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

THE NEW V-PRO SELF-TAPPING EXTRACTION-SCREWS Manufactured according to the latest state-of-the-art technical expertise Very powerful!High tensile strength and breaking load, combined with a high degree of torsion Our most economical customer uses our screws repeatedly up to 6 times - what should we do about this? No pre-drilling required! (self-tapping)It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coatingOptimized thread geometry and screw length!Maximum retention force in each cylinder profileOne-handed screw-in without a ScrewFix bit adapter!Whether by hand or cordless electric screwdriver, via its patented SIT® 20-bit drive (fully downward compatible with TORX20) A great advantage of the SIT 20 drive is that the screw can be driven in with one hand and without a screw adapter. Those who have ever had to thread in screws of other manufacturers will love this advantage! Having a high speed on the drill and applying pressure on the screw is advantageous for easy threading of the V-PRO extraction screw! DELTA SEAL® High-tech color anti-friction coating!The anti-friction coating supports easy screw-in actionAn individual colour scheme for each screw sizeCorrosion protection Important! Experience has shown that a lubricant is often used to assist in threading the screw. This is not necessary with V-PRO extraction screws and in fact is counterproductive.Our screw has an anti-friction coating that does not require a lubricant. If additional lubrication is used, it can lead to the shavings becoming clumped which can no longer be eliminated. V-PRO screws have an impression stamped into the screw-head! Latest technology — Made in Germany!We guarantee the highest qualityDepending on the ordered quantity, the screws will be sent either in boxes or sachets. In this packaging unit we include a SIT20 quality bit.