Broco Lance Ø 6.35 x 450 mm

The HOT SHOT Kit Prime-Cut has been revamped by BROCO.The manufacturer has added a spacious, higher quality carrying case that holds additional gear such as a regulator, clothing and everything else needed to get the job done. The welding gloves were also upgraded and the glasses were replaced with a protective mask. The central unit of the BROCO HOT SHOT kit Prime-Cut consists of the handle for the lances, which holds the burning rods with special collets and the integrated oxygen valve to regulate oxygen supply towards the end of the lances. The 3 meter long oxygen pipe, which is connected to the handle, is to be connected to a conventional oxygen pressure regulator. We screw the set together fitting to the European standards.(Pressure regulator and oxygen bottle are not included in the set)Functioning:The following articles and accessories are required to work with Hot-Shot thermic lances:Art-No 60300 - Hot-Shot KitBattery with min. 12 volt and 10 Ah. A battery for motorbikes with these characteristics is sufficient.Oxygen bottle (the size depends on the quantity of material you want to cut and existing means of transport /space.Pressure regulator for oxygenAppropriate quantity of thermic cutting rods for the planned application Connect the pressure regulator to the oxygen bottle and the end of the oxygen hose to the exit of the pressure reducer. The clamps of the strike plate and the handle of the tool are connected to the battery according to the colour code (red to +, blue to -). Select the appropriate cutting rod and collet depending on the object you want to cut. Unscrew the nut of the handle in order to place the collet then tighten the nut slightly. Now place the thermic rod in the collet (the hollow end of the rod must be placed in the collet/handle) and tighten the nut completely. Now open the valve of the oxygen bottle and adjust the level of oxygen pressure using the pressure reducer. Now touch the strike plate with the tip of the thermic rod in order to create short circuit sparks. Push the mechanism of the handle, in order to let the oxygen flow through the cutting rod and thus igniting the rod. It is possible to adjust the oxygen pressure again in order to start cutting. The higher the oxygen pressure /throughput, the higher the temperature at the tip of the rod. While higher temperature allows faster cutting it will also result in a faster burning of the thermic rod. In order to cut, place the tip of of the rod directly on the surface of the object you want to cut.  When selecting the thermic cutting rods to be used keep in mind that the diameter of the rod and the length of the rod, in combination with the oxygen pressure used, influence the speed of the cut. The oxygen pressure that is optimal depends on the material that is to be cut. The producer recommends the following approximate oxygen pressures for different types of metals: 0.6 - 1.4 bar for the punc  turing hard metal plates1.5 - 3.0 bar for the cutting of steel plates up to 0.7 mm thickness3.0 - 3.5 bar for the cutting of steel plates up to 15 mm thickness3.5 - 4.2 for the cutting of steel plates from 15 mm to 50 mm thickness4.2 - 5.5 for the cutting of steel plates over 50 mm thickness Unfortunately the producer does not give recommendations for the cutting of concrete, bullet proof glass or other materials. Users can quickly find out the optimal oxygen pressure through some short testing, though. 

In this unique, 39-piece lock pick set, ambitious lock pickers will find a selection of the picks appreciated most by "Lock Noob" and which he uses on a daily basis. Besides the Abona and Monith rakes designed by "Lock Noob" himself, these are comprised of, without exception, 19 selected Multipick ELITE picks plus two ELITE dimple lock picks. 16 different Multipick ELITE tensioners, including 3 TOK tensioners, and 3 champion tensioners Chr. Holler and 3 dimple lock tensioners round off this rich, high-yield, high-quality set. Quality features:The ultimate lock-pick set in worldwide unrivalled high-tech quality.Finest pick tips - ingenious spring steel - perfect workmanshipHigh-quality individual design - perfection down to the last detailNo duplicate picks or tensioners100% Made in Germany - by Multipick, of courseThis elegant set is housed in a fold-out genuine leather case. - A "must have" for every "Lock Noob" fan! - 

You find our G-Pro dimple lock picks great, but would like to have bigger, thicker handles? You are not alone in the lock picking community. That's why we now have a limited edition with bigger, thicker handles and an additional marking indicating the index point. This provides you with two practical advantages simultaneously. Easier to hold the pick (especially advantageous for bigger hands) and the index point is always in view. In this way, you will always be able to locate the next pin. The handles and the compilation of the kit were done in collaboration with Lock Noob, and have been additionally surface-treated by us in order to make the surface more scratch-resistant. The new kit is only available for a limited time, exclusively and only from us. So be quick, because as always, only while stocks last. The ELITE G-PRO are characterised by: Finest polished tips in many variations for the widest range of locks Maximum feedback - maximum feel of the pin movement to the user Highest level of resistance, especially with the last pin, due to the special handle shape Non-slip, fatigue-free handles made of rubberised aluminium Exchangeable and individually available dimple flags 100% Made in Germany, Made in Bonn 

Suitable for all standard bits and combi thread drills.Suitable for all standard bits and combi thread drills. Suitable for all standard bits and combi thread drills. 

This item is sold solely to fire brigades.Other parties who are authorised to use this tool may purchase this item on submitting a document confirming their authorisation. 

The new, improved Quick-Key Easy Pro Set from MultipickThe most precise and fastest key copy system in the world - now even more compact, lighter and cheaper.We have succeeded in significantly improving some of the key features of the Quick-Key Easy. We have fulfilled your wishes by making the set lighter and more compact. It is even easier to store and the new packaging of the impression-making material make it even faster to use. New precision mouldNew practical packaging for the casting compoundEasier to handleReduced priceThanks to the new and handy plastic casting mould from MULTIPICK. Together with the exact measured quantity of the required moulding compound, it is now possible to mould all types of keys and produce duplicate keys in a matter of no time. Post-processing is unnecessary.The great advantage of the new system is the permanent and quick readiness for deployment and the possibility to transport the duplicated key safely and securely for a later key production and to keep it stored for a long time.The Quick-Key Easy Pro comes complete with all the required accessories* to produce at least 5 keys. All components can also be ordered individually.It’s an absolutely ingenious tool that you can start using immediately.Dimensions: 180 x 145 x 45 mm*Due to shipping regulations, the sets are delivered without lighter fluid, but this is widely commercially available. 

Easylight 2 cutting rods are Broco's new and improved version of a torch that can be ignited by means of a 9V battery, a mechanical spark or a naked flame. This makes ignition much more convenient and quicker.The Easylight 2 thermal cutting rods were designed to fulfil the requirements, operations and capabilities of the user. Being a Broco product, Easylight 2 offers unequaled performance in terms of burn time, cut length per rod, evenness of combustion as well as minimal smoke.Advantages of the Easylight 2 cutting rods:• Easy to light with a 9V battery, mechanical spark or naked flame• No need for large battery, striker plate and cables• Long burn time - 1 minute, 30 seconds for more cuts per rod• Contain no hazardous substances• Consumes about 0.3 m³ O2 per rod• The cutting rods are easy to transport and store• Easylight 2 rods are approx. 610 mm long and have a diameter of 9.53 mm