Broco Lance Ø 9.53 x 1500 mm

 

The HOT SHOT Kit Prime-Cut has been revamped by BROCO.The manufacturer has added a spacious, higher quality carrying case that holds additional gear such as a regulator, clothing and everything else needed to get the job done. The welding gloves were also upgraded and the glasses were replaced with a protective mask. The central unit of the BROCO HOT SHOT kit Prime-Cut consists of the handle for the lances, which holds the burning rods with special collets and the integrated oxygen valve to regulate oxygen supply towards the end of the lances. The 3 meter long oxygen pipe, which is connected to the handle, is to be connected to a conventional oxygen pressure regulator. We screw the set together fitting to the European standards.(Pressure regulator and oxygen bottle are not included in the set)Functioning:The following articles and accessories are required to work with Hot-Shot thermic lances:Art-No 60300 - Hot-Shot KitBattery with min. 12 volt and 10 Ah. A battery for motorbikes with these characteristics is sufficient.Oxygen bottle (the size depends on the quantity of material you want to cut and existing means of transport /space.Pressure regulator for oxygenAppropriate quantity of thermic cutting rods for the planned application Connect the pressure regulator to the oxygen bottle and the end of the oxygen hose to the exit of the pressure reducer. The clamps of the strike plate and the handle of the tool are connected to the battery according to the colour code (red to +, blue to -). Select the appropriate cutting rod and collet depending on the object you want to cut. Unscrew the nut of the handle in order to place the collet then tighten the nut slightly. Now place the thermic rod in the collet (the hollow end of the rod must be placed in the collet/handle) and tighten the nut completely. Now open the valve of the oxygen bottle and adjust the level of oxygen pressure using the pressure reducer. Now touch the strike plate with the tip of the thermic rod in order to create short circuit sparks. Push the mechanism of the handle, in order to let the oxygen flow through the cutting rod and thus igniting the rod. It is possible to adjust the oxygen pressure again in order to start cutting. The higher the oxygen pressure /throughput, the higher the temperature at the tip of the rod. While higher temperature allows faster cutting it will also result in a faster burning of the thermic rod. In order to cut, place the tip of of the rod directly on the surface of the object you want to cut.  When selecting the thermic cutting rods to be used keep in mind that the diameter of the rod and the length of the rod, in combination with the oxygen pressure used, influence the speed of the cut. The oxygen pressure that is optimal depends on the material that is to be cut. The producer recommends the following approximate oxygen pressures for different types of metals: 0.6 - 1.4 bar for the punc  turing hard metal plates1.5 - 3.0 bar for the cutting of steel plates up to 0.7 mm thickness3.0 - 3.5 bar for the cutting of steel plates up to 15 mm thickness3.5 - 4.2 for the cutting of steel plates from 15 mm to 50 mm thickness4.2 - 5.5 for the cutting of steel plates over 50 mm thickness Unfortunately the producer does not give recommendations for the cutting of concrete, bullet proof glass or other materials. Users can quickly find out the optimal oxygen pressure through some short testing, though. 

 

Easylight 2 cutting rods are Broco's new and improved version of a torch that can be ignited by means of a 9V battery, a mechanical spark or a naked flame. This makes ignition much more convenient and quicker.The Easylight 2 thermal cutting rods were designed to fulfil the requirements, operations and capabilities of the user. Being a Broco product, Easylight 2 offers unequaled performance in terms of burn time, cut length per rod, evenness of combustion as well as minimal smoke.Advantages of the Easylight 2 cutting rods:• Easy to light with a 9V battery, mechanical spark or naked flame• No need for large battery, striker plate and cables• Long burn time - 1 minute, 30 seconds for more cuts per rod• Contain no hazardous substances• Consumes about 0.3 m³ O2 per rod• The cutting rods are easy to transport and store• Easylight 2 rods are approx. 610 mm long and have a diameter of 9.53 mm 

 

This particular pickset, tailored for intermediate and experienced lock pickers, was designed by Christina Palmer in 2020 according to her mathematical and technical calculations for the most common pick profiles. Christina Palmer is known for her great passion for locksport. She combines her personal experience with the laws of physics, applying both to the development of these sophisticated profiles.We would like to thank Ms Palmer for providing us with her pick and tension designs. Like all Multipick pick blades, they are made of the finest spring steel in an unrivalled high-tech quality with a thickness of 0.4 and 0.6 mm. In addition to 6 different types of hooks, 2 diamond picks, 2 curved picks, 4 wave rakes and 13 tensioners round up this ELITE-class pick set by Multipick, which is presented in a high-quality genuine leather case. 

The unbeatable Electric Lock Pick Set from Multipick!Outstanding quality from Germany!We are now also offering the popular Multipick Kronos EPG as a complete set with a large assortment of useful auxiliary tools. A hard-shell plastic case with appropriate recesses provides for secure storage; there is an additional small hinged plastic box for bits and pieces.The Kronos provides you with the most modern electronics coupled with a high-performance motor. Because of its low inherent vibrations, the Kronos is one of the most quiet (if not the most quiet) electric lock picks offered anywhere in the world. A genuine plus if you still have to be picking a cylinder lock in the early hours of the morning. Further we were able to convince one of the largest German manufacturers of DC motors to collaborate with us. Thanks to its newly designed power management system, the Kronos EPG is able to operate under steady load for more than two hours.Charging has never been so easy! Simply connect the accompanying USB cable via the included mains adapter or to a computer and recharge the Kronos without the tangle of various different cables. One single cable with many possibilities — that’s how we do it nowadays! An additional rechargeable battery delivers the needed “power” when the situation demands it. What’s more, the accompanying pick needles are manufactured out of exactly the same ingenious material as our ELITE lock picks.Important and useful accessories that one otherwise would have to buy separately, are also provided in this complete kit.So, to name just a few, there is the Circular Tensioner TNT-20-V3 for a quick change in the direction of tension. The TNT-20-V3 is the only circular tensioner anywhere in the world that offers the possibility of adapting precisely through a quick and tool-less change of the lower tension pin to different respectively curved cylinder profiles. Change pins for straight, left- and right-sided curved cylinder profiles are included as part of the delivered content.The Flip-It (Multipick-Original) - a further development with an extremely high utility value. With the new Flip-It, particular value was placed not just on its unusual design, but also on the mechanical precision of the “trigger system”. The mechanism in the new Flip-It makes it possible to “shot release” by just applying “light pressure” on the trigger button. The advantage this mechanism provides is that; one can work without the “exertion” that was generally necessary until now. This spinner thereby makes it possible to work very calmly and precisely.In addition to the standard ELITE pick needles (0.5 mm), a five piece needle set in 0.6 mm thickness is also provided. This thicker version is more forgiving of beginner mistakes by not breaking so quickly.Just take a look at everything that comes with this set — there are no more useful accessories than these!Nor would you expect anything less in this Kronos Complete Product Kit  “made in Germany” by Multipick. Technical specifications - Kronos:Li-Ion battery 3.7 V / 2900 mAhNeedle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed 13,000 rev/minWeight with battery - approx. 0.350kgDimensions: D=34 mm L=205 mmBattery life in continuous operation: approx. 2.5 hours