DIERRE NEOS Topolino Decoder

This 4-piece drill and mill auxiliary key set is an aid for targeted and efficient destructive opening of profile cylinder locks. It enables precise cutting of the core pin row in the cylinder housing by drilling or milling. The set makes the opening process considerably easier, especially for cylinders that are secured with hard driver pins.The drill and mill auxiliary key is inserted into the keyway of the profile cylinder. This pushes the cylinder core pins into the cylinder housing. A drill or milling cutter is then used to drill directly below the cylinder core in order to cut through the row of pins. Depending on the cylinder, the drilling depth is roughly 2.5 cm so that all pins in the core can be cut through. Once the milling or drilling has been completed, the tool should be held in the keyway to prevent the pins from moving and to prevent the cylinder core from jamming again. Afterwards, turn the key stump in the opening direction with the aid of a pair of pliers so that the auxiliary drill key can act as a key and open the cylinder.The thin key blanks fit into most standard profiles and cover around 90 % of common cylinders.This set is particularly practical as it not only makes the milling or drilling process easier, but also allows the key blank to be used directly to open the cylinder after milling. It is an essential tool for professionals who regularly have to open cylinders, including those that are particularly resistant. 

Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 18.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

6-sided Cutter for drilling out tubular (radial pin tumbler) locks.  

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Atra Dierre 6 pins, its construction is accordingly. The pick consists of a rod with 6 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Atra Dierre 6 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool.