Disc Setter-T2

Disc detainer locks are mainly padlocks and bicycle locks. The area of deployment is broad and can be found all over the world. With the ARES from Multipick and a little practice, you will be able to open almost any disc detainer lock. Furthermore, we offer common scales for Abus and Abloy. The difference is mainly in the graduation of 2mm (Abus, Abloy) and 1.6mm (Abloy). The scales are guides to make it easier to find the positions of the individual discs. The graduations already mentioned are the most widely used on the market. Of course, you can also use the scales for any other disc detainer lock. However, the graduation can then only be used as a reference. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer locks. With this set you will be able to open even tough locks. The basic module offers you the possibility to modularly expand your system.  Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, as used in all our products. In order to achieve smooth running between the tensioning tool and the setting tool, a sliding sleeve has been integrated. A clear laser marking of the corresponding components ensures precise orientation during operation. More control can be achieved by individually screwing the handles included in the scope of delivery into the basic module. These are necessary in some cases, especially when using the drill recess version. Changing the individual components, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. 

The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. 

The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10.  The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. More models are being planned. 

The unbeatable Electric Lock Pick Set from Multipick!Outstanding quality from Germany!We are now also offering the popular Multipick Kronos EPG as a complete set with a large assortment of useful auxiliary tools. A hard-shell plastic case with appropriate recesses provides for secure storage; there is an additional small hinged plastic box for bits and pieces.The Kronos provides you with the most modern electronics coupled with a high-performance motor. Because of its low inherent vibrations, the Kronos is one of the most quiet (if not the most quiet) electric lock picks offered anywhere in the world. A genuine plus if you still have to be picking a cylinder lock in the early hours of the morning. Further we were able to convince one of the largest German manufacturers of DC motors to collaborate with us. Thanks to its newly designed power management system, the Kronos EPG is able to operate under steady load for more than two hours.Charging has never been so easy! Simply connect the accompanying USB cable via the included mains adapter or to a computer and recharge the Kronos without the tangle of various different cables. One single cable with many possibilities — that’s how we do it nowadays! An additional rechargeable battery delivers the needed “power” when the situation demands it. What’s more, the accompanying pick needles are manufactured out of exactly the same ingenious material as our ELITE lock picks.Important and useful accessories that one otherwise would have to buy separately, are also provided in this complete kit.So, to name just a few, there is the Circular Tensioner TNT-20-V3 for a quick change in the direction of tension. The TNT-20-V3 is the only circular tensioner anywhere in the world that offers the possibility of adapting precisely through a quick and tool-less change of the lower tension pin to different respectively curved cylinder profiles. Change pins for straight, left- and right-sided curved cylinder profiles are included as part of the delivered content.The Flip-It (Multipick-Original) - a further development with an extremely high utility value. With the new Flip-It, particular value was placed not just on its unusual design, but also on the mechanical precision of the “trigger system”. The mechanism in the new Flip-It makes it possible to “shot release” by just applying “light pressure” on the trigger button. The advantage this mechanism provides is that; one can work without the “exertion” that was generally necessary until now. This spinner thereby makes it possible to work very calmly and precisely.In addition to the standard ELITE pick needles (0.5 mm), a five piece needle set in 0.6 mm thickness is also provided. This thicker version is more forgiving of beginner mistakes by not breaking so quickly.Just take a look at everything that comes with this set — there are no more useful accessories than these!Nor would you expect anything less in this Kronos Complete Product Kit  “made in Germany” by Multipick. Technical specifications - Kronos:Li-Ion battery 3.7 V / 2900 mAhNeedle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed 13,000 rev/minWeight with battery - approx. 0.350kgDimensions: D=34 mm L=205 mmBattery life in continuous operation: approx. 2.5 hours 

Abus- D6XARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Abus- D6X cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Abus- D6X, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

These scales are used for unlocking disc tumbler-/disc detainer locks. They are available in different graduations. Also here, the selection of a scale depends on the type of lock you want to open. This scale corresponds to the graduation 2.0mm .