DRONCO Grinding disc 115 x 1 x 22,23 mm

The special mini cutting disc that lets you reach hard to reach places.Manufactured according to EN 12413In accordance with oSaMade in Germany Well suited for thin steel panels used in construction, tools, and high-speed steels (HSS or HS).Features:Measurements: 2 3/8 x 5/64 x 1/4 inch (60 x 2 x 6 mm)Rotation Speed: 25,450 rpm 

The special mini cutting disc that lets you reach hard to reach places.Manufactured according to EN 12413In accordance with oSaMade in Germany Well suited for thin steel panels used in construction, tools, and high-speed steels (HSS or HS).Features:Measurements: 2 x 1/25 x 1/4 inch (50 x 1 x 6 mm)Rotation Speed: 30,550 rpm 

Practical tool set for broken latches. Allows easy access of the broken latch. How to use:remove the escutcheonfix the latch, for ex. with the latch opening carduse the inner opening of the nut to center the jig saw to remove the nut.through the created opening the latch can be drawn back with the high-grade steel hook, even if the latch is blocked. 

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

Now even better – even more secure!Using the new grinding disc holder with our special mini grinding discs for steel every grinder becomes a precious tools for low budged and allows the locksmiths to do precise cutting works. Indispensable for the professional for example with broken locks or bolts, padlock cutting etc. The disc holder is made of steel and assures a very precise true running of the discs even with high rotation. The extremely flat head of the fixing screw allows working very close to obstacles. A rubber ring gives a better grip between screw and grinding disc. The 6 mm diameter in the disc socket guarantees a better centric disc guiding when assembling and consequently avoids oscillating.Security advice: While using this tool you have to wear protection glasses!Very important! Don’t confound this tool with cheap and accident-prone products. The arbor diameter is 10 mm, the shaft diameter 6 mm, appropriate with all standard collet in different grinders. Total length: 68 mm.  

Now even better – even more secure!Using the new grinding disc holder with our special mini grinding discs for steel every grinder becomes a precious tools for low budged and allows the locksmiths to do precise cutting works. Indispensable for the professional for example with broken locks or bolts, padlock cutting etc. The disc holder is made of steel and assures a very precise true running of the discs even with high rotation. The extremely flat head of the fixing screw allows working very close to obstacles. (Allen key size 2,5 mm necessary) A rubber ring gives a better grip between screw and grinding disc. The 6 mm diameter in the disc socket guarantees a better centric disc guiding when assembling and consequently avoids oscillating.Security advice: While using this tool you have to wear protection glasses!Very important! Don’t confound this tool with cheap and accident-prone products. The arbor diameter is 10 mm, the shaft diameter 6 mm, appropriate with all standard collet in different grinders. Total length: 68 mm. 

The Magi Burr 60 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.