ELITE Advanced Lock Pick Set 40-pcs. 0.4 + 0.6mm

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

The Multipick ELITE SHANK quickly opens a large variety of everyday locks including most Filing Cabinets and Tool Chests! When used properly the SHANK will open the lock within seconds without any damage. Simply insert the SHANK through the key way and wiggle while turning the knife releasing the locking pawl and opening the lock.The Multipick ELITE Shank works on the following models and many more:File Cabinets & Tool ChestsHonWaterlooHudsonStanleyS&GYaleChicago6842CraftsmanEagleHuskyFraim PadlocksSlaymakerHerculesLudell,Master 77Sargent 752HS & 753HSTaylor 781 padlocks 

The Multipick ELITE G-PRO is the ultimate dimple lock pick kit for the professional lock picker.The highest-quality manufacturing and the finest materials allow unprecedented feedback when picking.The ELITE G-PRO is distinguished by its outstanding quality:Finest polished tips in many variations for the widest variety of locksMaximum feedback - maximum transfer of pin behaviour to the userExtremely stable, yet light and easy to handle, just like a springBlade shanks in various diameters for the perfect turning pointNon-slip, fatigue-free and lightweight handles made of rubberized aluminiumExchangeable and individually available tips to safeguard the investment100% made in Germany.Multipick G-Pro This much elegance also deserves a beautiful, safe and organized storage container.That’s why we tailored the perfect roll-up case with strap closure for the G-Pro, made with the finest cowhide leather. 

The LAB Pinning Mat is a work mat for locksmiths and lockpickers. The mat provides various working areas so that several cylinders or practice locks can be worked on at the same time. Each section has various small pockets and oblong chambers for spring pins and pins, which can be easily picked up with tweezers. The main working area has various elevations and edges to accommodate all kinds of bits and pieces. The back of the mat is designed to provide a good grip on most surfaces to prevent it from moving. Each mat features:Re-designed base with gritty texture for better grip and retrieval of loose pins.Multiple double-sided textured pin retention areasTwo wedge-shaped sections for inserting cylinders Dimensions (L x W x H): 53.34 x 27.94 x 1.00 cm Material: Polyvinyl Weight: 0.77 Kg 

Our wave rakes represent years of research and development. Based on various wave rakes which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted wave rakes. Like all lock picks from Multipick, they are made of the finest spring steel, in unrivaled high-tech quality in 0.6 mm-thickness. The waves of the rakes have a length of 25.4 mm in order to eliminate the normally required precise insertion depth and to facilitate simultaneous interaction with 7-pins. The wave rakes are equally tapered from the shaft to tip in order to maximize strength and to eliminate stress concentrations that cause lesser picks to snap. The long plow tip lifts pin 1 instead of bumping into it head on. With a good technique, prompt openings are often possible.Our new wave rake profiles are based on Christina Palmer's original (2019) quint cycloid and quint sinusoidal waves, which were designed by her and a group of PhDs. To achieve this, advanced Mathematica software was used to create an exact tapered wave effect. Christina Palmer is known for her great passion for locksport. She combines her personal experience with the laws of physics, applying both to the development of these two sophisticated profiles. We would like to thank Ms. Palmer for endowing us with her wave rake and tension wrench designs.    Digression:Cycloid curves characterise the wave forms as they can be precisely defined and drawn using parametric equations in CAD programs and have characteristics that lead to useful wave rakes. For example, cycloids are the curves created by the spirograph drawing tool, and also represent the curve of the fastest descent under constant gravity. Many cycloid wave forms were tested to determine the optimal parameters. Most commercially available wave rakes have sharp tips and steep slopes that make smooth raking challenging and also damage the pins. Our short cycloid wave rakes with a sine/cosine ratio of 0.25 provide non-slip action, making it ideal for simple basic locks. Our sinusoidal wave rakes with a sine/cosine ratio of 0 offer gentle action, ideal for hard locks. Both wave forms are available in a quad version for large locks and a quint version for small locks.While the long cycloid wave rakes are recommended for normal use, and the long sinusoidal wave rakes for gentle use. Short cycloid wave rakes are intended for fine raking.Caution! The aggressive cycloid wave rakes are sharp like a saw and can damage the pins and the entire lock. 

In this unique, 39-piece lock pick set, ambitious lock pickers will find a selection of the picks appreciated most by "Lock Noob" and which he uses on a daily basis. Besides the Abona and Monith rakes designed by "Lock Noob" himself, these are comprised of, without exception, 19 selected Multipick ELITE picks plus two ELITE dimple lock picks. 16 different Multipick ELITE tensioners, including 3 TOK tensioners, and 3 champion tensioners Chr. Holler and 3 dimple lock tensioners round off this rich, high-yield, high-quality set. Quality features:The ultimate lock-pick set in worldwide unrivalled high-tech quality.Finest pick tips - ingenious spring steel - perfect workmanshipHigh-quality individual design - perfection down to the last detailNo duplicate picks or tensioners100% Made in Germany - by Multipick, of courseThis elegant set is housed in a fold-out genuine leather case. - A "must have" for every "Lock Noob" fan! -