ELITE Set of small tension toolsSP-41 to SP-44

Welcome to the professional league The coronation of Multipick's ELITE turners This set would be Lock Noob's choice if he were to put together a set from the 52 turners we have in our portfolio. So, taking his advice, we have introduced our Multipick ELITE Tension Set 3 to the Locksport community. As one would expect, the 16 tensioners are all made out of high-quality steel and provide an excellent feedback during picking due to their flexibility and hardness. The various forms and lengths allow a wide range of opening possibilities and comes in a handy genuine leather case. The ultimate tensioner set in worldwide unrivalled high-tech quality.High-quality individual design - perfection down to the last detailNo duplicate turners30 years warranty if used properly100% Made in Germany - Made in Bonn - by Multipick of course. 

From now on, our ELITE tension wrench range is also available in a practical 8-piece set. Be well-prepared for every type of cylinder, from the outset. These eight tension wrenches are all made of high-quality steel and, thanks to their flexibility and hardness, these tensioners provide a very good feedback when picking locks. The varying shapes and lengths offer a wide range of possibilities for a successful opening. These tension tools are the perfect complement to our already "legendary" ELITE lock picks.The tension wrenches are stored and protected in a case made of the finest cowhide.Dimensions: 52 x 145 x 14 mm 

The special ELITE Top of the Keyway (TOK) Prybar Wrench Set 2 from Multipick is a combination of flat tension bars and heavy bars.All seven tensioners are made of high-quality steel and provide very good feedback when picking, due to their flexibility and hardness. The different shapes and lengths offer a wide range of opening options.The first three tools in the set are flat tension bars (SP11 to SP13, see pictures) offer a type of control that is often required, depending on the shape and condition of the lock. Some of them have teeth that are designed to increase the grip on the lock core.The four heavy bars (SP14 to SP17, see pictures) are designed for perfect tension control of the lock core. As with all types of tensioners that might be used for a specific lock, the following rule still applies: the closer the fit, the more control you will have over the lock core. Better control increases the frequency of feedback and facilitates minor adjustments.MP3SP11 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min 2.4 mm + max. 2.8 mmThickness: 0.6 mmTotal length: 76 mmWeight: 2 gMP3SP12 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 0.8 mmTotal length: 76 mmWeight: 2.5 gMP3SP13 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.0 mmTotal length: 76 mmWeight: 2.5 gMP3SP14 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.2 mmTotal length: 76 mmWeight: 3.5 gMP3SP15 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 3.9 mm + max. 4.2 mmThickness: 0.7 mmTotal length: 75.9 mmWeight: 2.0 gMP3SP16 Doublesided tension toolTechnical data:Side length: : 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 0.8 mmTotal length: 76.2 mmWeight: 2.5 gMP3SP17 Doublesided tension toolTechnical data:Side length: 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 1.2 mmTotal length: 76.2 mmWeight: 3.5 g Dimensions: 52 x 145 x 14 mmThis set is the perfect companion to our already "legendary" ELITE picks. 

Specially manufactured by ourselves to tackle the unusual properties of dimple pin tumbler locks. Also works with dimple pin cylinders made in the USA. Each individual dimple pin tensioner is made of high-quality spring steel and thus generates highly sensitive feedback.Specifications:1 x Tensioner with 1.2 mm thickness and 2.6 mm width 1 x Tensioner with 1.2 mm thickness and a conical width of 2.4 mm - 3.6 mm 1 x Tensioner with 1.5 mm thickness and 2.9 mm widthA Multipick product - Made in Germany 

From now on, our ELITE tension wrench range is also available in a practical 8-piece set. Be well-prepared for every type of cylinder, from the outset. These eight tension wrenches are all made of high-quality steel and, thanks to their flexibility and hardness, these tensioners provide a very good feedback when picking locks. The varying shapes and lengths offer a wide range of possibilities for a successful opening. These tension tools are the perfect complement to our already "legendary" ELITE lock picks. 

Y-tension wrench for different wafer locks and car locks. Technical data:Side length: 5.5 mmWidth: 2.5 mmThickness: 0.8 mmTotal length: 77 mm 

This tension tool was created, especially for tensioning in front of the pins, so that there will be more room to work within the keyway. This type of tensioning technique is the preferred option for almost all cylinder locks when it comes to pick opening. Various sizes and gauges ensure that the tool sits perfectly and there is also a choice to match a wide range of profiles. All tension tools in this Champion series are rigid in order to give optimum feedback when picking. Dimensions:Length: 77 mmWidth: 2.35 mmThickness: 1.0 mmSide length (inner): 6.2 mmSide length (outer): 7.2 mm