ELITE TOK Turner Flat Single Ended Short SP27 1.3mm

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 12.70 mmShank length (outer): 16.70 mmWidth: 4.0 mmWidth of the shank: 3.05 mmWidth of the shank tips: 2.3 mmThickness: 1.3 mmTotal length: 76.20 mmWeight: 3.0 g 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily, and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 2.8 mmShank length (outer): 6.8 mmWidth: 4.0 mmWidth of the shank: 2.3 mmThickness: 1.3 mmTotal length: 76.20 mmWeight: 4.0 g 

The special ELITE Top of the Keyway (TOK) Prybar Wrench Set 2 from Multipick is a combination of flat tension bars and heavy bars.All seven tensioners are made of high-quality steel and provide very good feedback when picking, due to their flexibility and hardness. The different shapes and lengths offer a wide range of opening options.The first three tools in the set are flat tension bars (SP11 to SP13, see pictures) offer a type of control that is often required, depending on the shape and condition of the lock. Some of them have teeth that are designed to increase the grip on the lock core.The four heavy bars (SP14 to SP17, see pictures) are designed for perfect tension control of the lock core. As with all types of tensioners that might be used for a specific lock, the following rule still applies: the closer the fit, the more control you will have over the lock core. Better control increases the frequency of feedback and facilitates minor adjustments.MP3SP11 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min 2.4 mm + max. 2.8 mmThickness: 0.6 mmTotal length: 76 mmWeight: 2 gMP3SP12 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 0.8 mmTotal length: 76 mmWeight: 2.5 gMP3SP13 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.0 mmTotal length: 76 mmWeight: 2.5 gMP3SP14 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.2 mmTotal length: 76 mmWeight: 3.5 gMP3SP15 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 3.9 mm + max. 4.2 mmThickness: 0.7 mmTotal length: 75.9 mmWeight: 2.0 gMP3SP16 Doublesided tension toolTechnical data:Side length: : 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 0.8 mmTotal length: 76.2 mmWeight: 2.5 gMP3SP17 Doublesided tension toolTechnical data:Side length: 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 1.2 mmTotal length: 76.2 mmWeight: 3.5 g Dimensions: 52 x 145 x 14 mmThis set is the perfect companion to our already "legendary" ELITE picks. 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 12.70 mmShank length (outer): 16.70 mmWidth: 4.0 mmWidth of the shank: 3.05 mmWidth of the shank tips: 2.3 mmThickness: 1.0 mmTotal length: 76.20 mmWeight: 3.0 g 

The SP13 flat tension bar offers a type of control that is often required, depending on the shape and condition of the lock.Doublesided tension tool Technical data: Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.0 mmTotal length: 76 mmWeight: 2.5 g  

Welcome to the professional league The coronation of Multipick's ELITE turners This set would be Lock Noob's choice if he were to put together a set from the 52 turners we have in our portfolio. So, taking his advice, we have introduced our Multipick ELITE Tension Set 3 to the Locksport community. As one would expect, the 16 tensioners are all made out of high-quality steel and provide an excellent feedback during picking due to their flexibility and hardness. The various forms and lengths allow a wide range of opening possibilities and comes in a handy genuine leather case. The ultimate tensioner set in worldwide unrivalled high-tech quality.High-quality individual design - perfection down to the last detailNo duplicate turners30 years warranty if used properly100% Made in Germany - Made in Bonn - by Multipick of course. 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 6.3 mmShank length (outer): 10.3 mmWidth: 4.0 mmWidth of the shank: 3.0 mmWidth of the shank tips: 2.3 mmThickness: 0.8 mmTotal length: 76.20 mmWeight: 4.0 g