Skip to main content Skip to search Skip to main navigation
Quality products since 1997
International distribution
Shipping within 24 hours*
Personal point of contact
Purchase on Account for Authorities

Allen Key 2.0 mm (Spare)

Product information "Allen Key 2.0 mm (Spare)"

 
Manufacturer "Multipick"

Multipick Direct GmbH
Godesberger Str. 51
53175 Bonn
Germany
Telephone: +49 228 39187 60
Telefax: +49 2283918741
E-Mail: [email protected]

     

    0 of 0 reviews

    Average rating of 0 out of 5 stars

    Leave a review!

    Share your experiences with other customers.


    Customers also viewed

    In Stock
    Auxiliary key for milling
    Auxiliary key for milling
    The auxiliary key for milling corrects malfunctions after milling.  After milling there may some obstacles which the auxiliary key helps to eliminate: 1. On cylinders with emergency function: Maintain the locking engagement pushed inside with the auxiliary key in the middle of the cylinder while turning it. 2. Normal cylinders: Engagement slipped forwards by the vibrations during milling. Keep the cylinder hole vertical and move the engagement inside with the auxiliary key. This allows turning the locking nose.3. Key in the cylinder from inside: While turning with the auxiliary key, push a sharp 1mm spring steel wire at the border of the cylinder plug so that it takes along the locking nose. 
    SKU#: 6348
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    Available ex stock
    In stock
    Double-bit decoder for Ezcurra /Fiam 6x6
    Double-bit decoder for Ezcurra /Fiam 6x6
    Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Ezcurra /Fiam 6x6, its construction is accordingly. The pick consists of a rod with 6x6 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Ezcurra /Fiam 6x6 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 
    SKU#: 62855
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    Available ex stock
    In stock
    Bump Key CISA
    Bump Key CISA
    Bump Key CISA 1 (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!   
    SKU#: 36201A
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    Available ex stock
    In stock
    Bump Key CES new
    Bump Key CES new
    Bump Key (piece) CES new We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!  
    SKU#: 36109
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    Available ex stock
    In stock
    VAG - Laser Track Keys (HU66)
    VAG - Laser Track Keys (HU66)
    Attention! New Multipick Production!The new Laser Track key HU66 of Multipick’s latest production for car door openings of the brands: AUDI, SKODA, PORSCHE, SEAT, VW etc. Even more simple to use thanks to new profiling. The necessary exertion of force has been considerably reduced. The new Multipick product generation features a very high capacity and durability thanks to the especially hardened tool steel.Simply a precision tool "Made in Germany".  Specifications: Wrench size: 10 mmLength: 75 mmWeight: 0.028 kg 
    SKU#: 43164
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    Available ex stock
    Only 1 available
    Allen Key 0.9 mm (Spare)
    Allen Key 0.9 mm (Spare)
     
    SKU#: 21021
    only 1 available

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    only 1 available
    In stock
    Replacement spring kit-3
    Replacement spring kit-3
     
    SKU#: FEDER-SET-3
    Available ex stock

    - Delivered within 1-9 days, depending on shipping method and country of delivery

    Available ex stock