HSS-Co 8% DIN 338 Type N-HD 4.0 mm

Cobalt HSS CO 8% DIN 338 HD DrillsProfessional HD (Heavy Duty) special drill for highest requirements. Bit angle 135°, croß cut C shape. tolerance h8. Particularly solid drill made off high-alloyed HSS-Co (8%, 10% Mo) with distinct thermo-set resistance. For drilling of wear-resistant sheet metals, steel and bronze up to 1400 N/mm2, of hard and high-strength alloys on CrNi-base and acid and heat proof steels.Total Length: 70 mm Price per piece. 

Cobalt HSS CO 8% DIN 338 HD DrillsProfessional HD (Heavy Duty) special drill for highest requirements. Bit angle 135°, croß cut C shape. tolerance h8. Particularly solid drill made off high-alloyed HSS-Co (8%, 10% Mo) with distinct thermo-set resistance. For drilling of wear-resistant sheet metals, steel and bronze up to 1400 N/mm2, of hard and high-strength alloys on CrNi-base and acid and heat proof steels.Total Length: 93 mm Price per piece. 

The 3.5 mm Door Handle Lasso Tool is a classic opening tool designed for non-destructive entry through slammed doors. Thanks to its slim diameter, it can be guided through the gap beneath the door to reach the interior door handle, which is then operated via the pull cord to depress the handle from the outside. This allows access without damaging the lock or the door. The tool works particularly well on doors with sufficient clearance at the bottom edge (approx. 4 mm or more), or in combination with methods used to create or widen the gap. In many cases, this simple technique provides the quickest solution for opening a door that has merely been slammed shut. Further developed in collaboration with locksmiths and authorities, this tool remains a proven and practical standard solution for professional users who regularly deal with slammed doors. Dimensions: Pull cord length: 156 cm Handle section length: 25 cm Cord attachment section length: 11.5 cm Lever section length: 113 cm  

Cobalt HSS CO 8% DIN 338 HD DrillsProfessional HD (Heavy Duty) special drill for highest requirements. Bit angle 135°, croß cut C shape. tolerance h8. Particularly solid drill made off high-alloyed HSS-Co (8%, 10% Mo) with distinct thermo-set resistance. For drilling of wear-resistant sheet metals, steel and bronze up to 1400 N/mm2, of hard and high-strength alloys on CrNi-base and acid and heat proof steels.Total Length: 86 mm Price per piece. 

Cobalt HSS CO 8% DIN 338 HD DrillsProfessional HD (Heavy Duty) special drill for highest requirements. Bit angle 135°, croß cut C shape. tolerance h8. Particularly solid drill made off high-alloyed HSS-Co (8%, 10% Mo) with distinct thermo-set resistance. For drilling of wear-resistant sheet metals, steel and bronze up to 1400 N/mm2, of hard and high-strength alloys on CrNi-base and acid and heat proof steels.Total Length: 61 mm Price per piece.