Guide rod for "Genius"

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

With this cylinder gauge Multipick proposes a handy measuring tool to the professional locksmith. In only one process cylinder lock lengths on both sides are measurable fast and precisely.Solid Aluminium/Steel construction with easy readable length scale. For doors up to 180 mm thick.Weight: 180 grams 

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism.Normally this opening technique is only possible with simple fittings which are not screwed together. The device of the “Bridge” lifter for fittings is fixed to the exterior door handle. On regular pulling by use of the screws the fitting comes off the door leaf by a few millimeters. The adapted square bolt knife will be inserted to the gap and the lock will be opened by turning the square bolt. NEW! Highly durable and long lasting construction. Big advantage due to new special trapezoidal thread which makes it easy to tighten - this prevents the thread from "seizing". The regular and smooth pulling of the fitting by the 2 screws of the Bridge should be careful since pressure marks of the tools’ feet may occur in case of inattention! The respective square bolt knives (8 mm and 10 mm) are included. Also this tool is very well adapted together with our emergency set for broken latch. A 17 mm driver is needed in order to turn the screws lifting the fitting! The “Bridge” differs essentially from the other lifters on the market in the following ways:Assembly of high-value aluminiumDespite new light weight construction extremely loadableVery solid finishingExtremely high durabilityOptimal exertion and distribution of pulling forceBig advantage due to new special trapezoidal threadQuick identification of bolt diameter through millimeter markings    

The door can be unlocked with the universal key after removing the cylinder. The calibration to determine the length of the cylinder is very practical. Version: metal. Art-No. 2030 Universal Key “long”Art-No. 2031 Universal Key “short” 

New cutting-edge design, new top features - unique! – The Centurion from MultipickNow also suitable for the North American market!The Centurion is a new, enhanced product from the ©Multipick brand and is manufactured with the latest CNC milling machines using high-quality aircraft aluminum. The Centurion is "the" next generation high-tech cylinder holder. The brilliant design combined with a high-quality surface makes the Centurion always look outstanding. The elegant and massive base of the solid milled foot provides a secure and firm footing. The small rubber studs on the base of the Centurion secures it against slipping on virtually all surfaces during picking. However, in the event of extreme “pick attacks”, the supplied table clamp can prevent the Centurion from slipping. The newly milled cylinder mount is milled perfectly to fit all Euro profile cylinders and demonstrates only minimal play. In addition, the cylinder is secured on the top by a knurled screw which completely eliminates slipping and allows you to concentrate fully on the cylinder and its opening.North American users can now also benefit from the additional mounting capability of the cylinder.Further, if you’re looking for a high-quality practice cylinder, we recommend the model sets TCS-SET and TCSS-SET respectively. The sets are manufactured by ©Multipick and are the perfect complement to the Centurion.You are welcome to let us engrave your centurion individually. Image, drawing or even names can be engraved. ©Multipick works with the most modern laser technics and can place all kinds of subject under the laser.You are welcome to contact us for more information. Colour: Aluminium (EN: AW-7075)The centurion is delivered in parts. A fitting Allen Key of 3 mm is included. Dimensions: Height: 215 mmLength of the pillar: 185 mmDiameter of the pillar: 37 mmBase (triangle): 145 x 145 x 145 mmWeight: 0.924 kg Fine precision engineering "Made in Germany" by ©Multipick  

The perfect combination of a Euro profile cylinder and a Dimple cylinder - unique and only from Multipick Something that was impossible for most a while back is now becoming a reality: Controlled practice to overcome the difficulties of a Dimple cylinder and a Euro profile cylinder. Thanks to the modular structure and side slots, our training locks are perfect for educating yourself how to pick difficult cylinder locks, such as dimple and euro profile locks. This is the perfect training tool for lockpicking at home and at work. Dimple or Euro profile? - Both! This practice lock literally has two sides: One side features a Euro profile and the other a Dimple profile. Variation and versatility are the most important characteristics of this model. You can always choose the appropriate cylinder and only have to decide which profile you want to use. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The set contains the required set of pins including a pair of tweezers in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Practice in a varied way to keep your skills improving. If you are looking for more challenges, you can order additional sets of pins in various sizes as accessories from our shop. These sets include many more key pins and driver pins as well as spool pins, security pins and springs, of course. For the best and most secure lockpicking practice, we recommend our Centurion vise. The Centurion provides a secure hold for your training cylinder and helps you to concentrate solely on picking. The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:Complete super set with top accessories for added possibilitiesStart immediately and celebrate your first achievementsTrain like the pros - progress from novice to professionalBecome quickly successful - What you see is what you do - learn and understand!Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm When you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.