HPC - Auto Sleeve

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers. 

These Auto wedges, made of plastic, are required for opening the car via the inside or via the lock rods. They widen and secure the created gap required for accessing the car. Additionally the groove within the wedge can be used to enter hooks, wires, the flex-a-light and other tools into the inside very easily. 

This double sided, 20cm long lever with differently shaped ends is an excellent tool for the careful opening of vehicle doors. After using this tool, an air wedge can then be easily inserted into the gap created. The hardened plastic material minimizes the risk of scratching paintwork, any chrome parts or damaging any rubber seals.   

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!!