Keyway Cleaner

Fine, high quality spring steel with aluminium handle to push the cylinder coupling in and to carry on the cam if the picked plug is spinning. Suitable as well for manipulation as for destructive openings (drilling).   

ELITE Extractor-Set 4 pieces The 4-piece extractor kit contains the most modern tools to eliminate broken keys and other foreign bodies from locks and cylinders, even from very narrow keyways.Dimensions: 52 x 145 x 14 mm 

The Multipick magnetic lifter is characterised by its versatility. Thanks to its telescopic design, the magnetic staff can be extended from a compact length of 11.5 cm up to 50 cm for flexibility.It is made of high-quality chrome-plated metal and is fitted with a strong magnet at its tip to draw ferromagnetic metal pieces out of a cylinder or a broken or milled cylinder, as well as to remove small pieces of metal residue from the cylinder receptacle after use with our V-Pro extraction screws.The corrosion-resistant and durable material ensures a long service life. A practical feature is the integrated pocket clip, which makes the magnetic lifter to be transported easily. This means it can be comfortably taken along with you for any job, especially at the customer's premises. 

The ideal set for extracting broken keys and other undesired parts/items from the keyway of the cylinder. May also be helpful for other difficult applications.  

The auxiliary milling key is designed to address malfunctions that occur after the milling process.For cylinders with emergency and danger functions, the cam coupling is held in place by pressing the auxiliary milling key into the center of the cylinder while turning it. If the coupling becomes stuck, a light tap with a hammer can help release it.For standard cylinders, vibrations during the milling process may cause the coupling to shift forward. To resolve this, hold the keyway in a vertical position and use the auxiliary milling key to push the coupling inward, allowing the cam to rotate freely.If a key is lodged inside the cylinder, use a 1 mm pointed spring steel wire, such as our Coupling Actuator (SKU: 3138), which can be purchased separately. Press the wire against the edge of the core while simultaneously turning the auxiliary milling key to move the cam.