Latch Opening Cards for Double-Offset Doors 2 pcs.

The door lever is an easy to use tool for lifting up doors. Very suited when using the latch opener set for double-offset doors and in many other situations. 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

Patented Opening Cards for Single and Double-Offset DoorsHaving to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on …The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (Art.-No.: 2320), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use. 

The (in our opinion) perfect Door Latch Slider The latch opening slider “TFG” completes our selection of tools for the opening of closed but unlocked doors . We are absolutely enthusiastic about the tool’s effectiveness and quality and use the "TFG" on an almost daily basis ourselves. The "TFG" comes in 5 different sizes: 15, 20, 25, 30 & 35 mm, each size optimized for the different types of offset door designs. Experience tells us that there is no better tool for the simple opening of closed but unlocked doors. Put this to the test yourself! The use is incredibly easy! Insert the "TFG" in the gap between door and frame, slide it down to the latch and the door opens.It is made out of highly flexible spring steel and is only as thick as 0.8 mm. The "TFG" can be used effectively almost everywhere. The "TFG" has no sharp edges, and does not cause scratches or other damages on the door or the frame. If the sliding of the "TFG" is made difficult by the sealing strip, lubrication of the "TFG" is very effective. 

Patented Opening Cards for Single and Double-Offset Doors Having to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on …The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (Art.-Nr. 2320), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use. 

Practical tool set for broken latches. Allows easy access of the broken latch. How to use:remove the escutcheonfix the latch, for ex. with the latch opening carduse the inner opening of the nut to center the jig saw to remove the nut.through the created opening the latch can be drawn back with the high-grade steel hook, even if the latch is blocked. 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors.