Lockoff Door Peephole Opener - Made in Germany

The LockOff  Door Peephole Opener Kit - Now Being Manufactured By MultipickFrom now on, the LockOff door peep hole opener kit will be manufactured by Multipick in superior Multipick quality. However, we have kept the ingenious basic construction of the tool and simply reinforced the established weaknesses substantially. The Multipick LockOff has finally transitioned into a mature and durable tool, made in Germany.Thanks to its sophisticated system, this high-quality lever tool allows the opening of locked doors, whether single or double-rebated. It is particularly effective for opening self-locking doors.The included auxiliary tools, such as the “Special Pliers” and the “Peephole  Turbo-Helper”, which come in a high-quality shoulder bag for convenient transport and storage, are sufficient to open a door in the “blink of an eye” without causing any damage.In our opinion, this opening tool should be a “must have” component of in the professional equipment carried by emergency key services.Operation: Before using this tool, you should find out which type of door handle is installed. Unfortunately, rotary door knobs are also not operable with this opening tool. First, the length of the LockOff  lever arm must be adjusted. To do this, it's necessary to re-adjust and fix the LockOff rod, adjusting it from the center of the peephole to a position in relation to its distance to the door handle. The angled lever arm rests on the inside door handle. The rubber stopper on its tip prevents damage in case it hits the door. The door handle can be operated by pressing on the outside arm. The calibration of the lever arm in front of the door is very important! If it's too short, the lever slips off the handle before it can be pressed down sufficiently. If it's too long, one cannot generate enough force to press the lever down. In case of misalignment, the inserted LockOff can easily be pulled out and re-adjusted. The door peephole can also be easily removed from the outside with the special cranked pliers; take care to prevent scratches when the pliers slide off onto the door panel. With the LockOff – Peephole Turbo-Helper developed by us, you can remove all standard door peepholes without causing any destructive damage, in no time at all. Simply clamp it into a drill or screwdriver and “unscrew” the peephole with the necessary counter-pressure.Also, from now on, we will be offering a cost-effective modification, or repair  of your old LockOff. at a fixed price. All components with proven vulnerabilities will be replaced by new Multipick components, giving you a more robust and durable tool, including free express return shipping.Images may differ from original. 

ATTENTION: The conversion does not apply to the long shank with tilt arm (see illustration!).From now on, we offer a cost-effective conversion or repair of your old LockOff. However, we need your old LockOff door peephole opener in order to do this.All parts that have proved to be weak points in the past will be replaced by Multipick components at a fixed price, giving you a more robust and durable tool including free return shipping.This is how it works:- Order and pay for the item here in our webshop- Send us your old tool- Allow us approx. 1 week- We will send back your "almost" new piece of equipment (shipping is included for DE).The repair/conversion process can only be carried out in our workshop. 

This genius and simple tool removes easily all common door spies without any damage. Simply fix to a drilling machine or to a screwdriver and unscrew the door spy with the necessary pressure. 

 

We have put together an unbeatable milling set for you! M4 Multipick's milling bag - A complete set for milling cylinders, but not just for fire brigades! Small, practical and safely packed - always ready to go! Technical data:Idle speed: 26.000 min-1Collet chuck: 6 mmApplication tool max.: 36 mmBattery voltage: 18 VDimensions (L x W x H) mm: 402 x 82 x 118Battery voltage: 18 VWeight: 2.0 kg 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

Door Spy drill WS 15 mm Ingenious drill for split free drilling of 14 mm door spiesArt.-No.: 55304