Milling Burr "Vampire" 4 x 6 x 60 mm

Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 18.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The latest generation of solid carbide burrsThe cylindrical shape profile cylinder milling burr 4 x 70 mm from PFERD for locksmiths features a drilling tip and toothed cutting edges. This milling burr has been specifically designed for efficient and fast milling of security profile cylinders with pull protection. The built-in drill tip ensures precise alignment, which means that the profile cylinder can be milled precisely. Due to the toothing and the specially positioned grooves, optimum removal of shavings is achieved, which reduces the risk of jamming and breakage of the tool. This innovative burr also stands out due to its long lifespan. In comparison to other burrs, it enables profile cylinders to be opened much more quickly due to its high milling capacity. 

Features: • Spindle housing made of die-cast aluminium with 35 mm Ø collar • Euro collet 43 mm Ø • Particularly slim housing, easy to grip • Additional 3 mm and 8 mm collets available as accessories • Slide switch for convenient one-handed operation • Anti-restart feature with warning light prevents the machine from starting when the battery is inserted and switches on when the capacity is insufficient • Supplied in a cardboard boxTechnical Data: • Operating mode: Battery operated • Battery power: 18Volt • Collet chuck: 6 mm • No-load speed: 26,000 min-1 • Weight: 2.0 kg 

The Plain Burr 50 mm from Soubertools is a milling burr specially designed for opening locks made of brass, steel and aluminium. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

This solid carbide high-speed drill of the latest generation is made of 100% carbide. It is the top product for cylinder openings in record time, and distinguishes itself in a high durability. For best results use a milling machine. Even with a drilling machine or a cordless screwdriver this cutting burr gives conspicuous service. In connexion with our high-performance grinding bits the user obtains an almost perfect and durable tool combination! With this drill the cylinder will be cut straight in very short time, no matter what kind of drilling protection you may find. Normally the cylinder should be possible to open by now. If it does not, you enlarge the existing whole sidewards with a grinding bit. Since this way of proceeding spares the tooth system of the grinding bit and besides is fast and efficient, we consider this combination of drill grinding bit and grinding bit as an ideal supplementOn top of our high performance cutting burrs a "must" for the equipment of every locksmith! Technical Data:Shaft-Ø: 6 mmLength: 60 mmCutting Length: 30 mm100% CarbideVery Long DurabilityBlue-Tec coated 

This "Minimum" lockpick set is quite a special selection: Curated by the multiple German lockpicking champion Christian Holler, the set contains only the most essential tools needed to cover as many locks as possible.We collaborated with Christian for quite a long time on the selection of each individual tool in order to achieve the best possible price and performance ratio, and the outcome is suitable for beginners as an entry-level set as well as for advanced users. This kit has been extensively tested. Like all our picks and tensioners, it fulfils the highest requirements and is manufactured in Germany. The ultimate lock picks in unrivalled worldwide high-tech quality.Finest blades - ingenious spring steel - impeccable workmanshipHigh-quality individual design - perfection down to the finest detail100% Made in Germany - by Multipick of course 

Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 18,0 mm d2: 6.0 mm I2: 50 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan