Pick needle PN-1 "extra long" (0.6 mm)

Pick needle PN-1 "Extra long" (0.5 mm)Especially for tricky cylinder locks our pick blades out of German Hightech-steel facilitate the required opening success with the electric pick. The pick blades may be used with all electric picks of our range and with the manual pick gun and Multipick System. But they are not absolutely necessary with the Multipick System.Brilliant Quality "Made in Germany" by ©Multipick 

Pick needle PN-14Especially for tricky cylinder locks our pick blades out of German Hightech-steel facilitate the required opening success with the electric pick. The pick blades may be used with all electric picks of our range and with the manual pick gun and Multipick System. But they are not absolutely necessary with the Multipick System.Brilliant Quality "Made in Germany" by ©Multipick 

Here we are looking at different "Dimple pin picks" required for setting the pins in the lock. We currently offer 5 different picks. These differ in the design and shape of the "flags". Depending on the requirements, the corresponding pick is used. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock China 6 pins, its construction is accordingly. The pick consists of a rod with 6 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case China 6 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Bump Key GERDA 1-piece We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Artemis - the smallest handmade electric lock pick in the world.Now let's talk about true greatness! Small, handy and yet highly powerful. The new electric lock pick gun Artemis from Multipick. Small in its dimensions, but big in its success in opening. An electric pick that we produce exclusively in different colours and in limited quantities. We have managed to construct an electric lock pick that puts all known dimensions in the shade. The goal was to design a completely new electric pick gun with a clear focus on size and performance. For the entire concept, we not only reduced the size of the individual components, but also used a completely new high-performance motor for the first time, never used before in an electric pick. All parts were newly developed and adapted to the needs of the latest opening techniques. Due to its special structure, the high-performance motor has a very low inherent vibration, which results in a very smooth and, above all, quiet operation. The Multipick Artemis combines power, durability, control and exclusivity in a compact design. We have given the Multipick Artemis a special, skin-friendly soft-touch coating (not in the colour white). This not only gives the tool an elegant look, but also helps you to open the cylinder with precision and control. With the Multipick Artemis we have achieved something that many thought would not be possible for a long time. We are the only manufacturer of lockpicking tools to offer a professional electric pick which is handy in size and at the same time in no way inferior to a conventional tool. An electric pick that easily lasts for well over 2 hours and, like its big brother, the Kronos, almost guarantees opening success. All this shows true greatness and is the only thing that matters. Like all our tools, the Multipick Artemis is an exclusive piece of German engineering. Developed and produced here in Bonn. Of course, you can also use all our electric pick needles from our range with our Multipick Artemis. Colour:Master Black Features that speak for the Multipick Artemis: Very compact structure 25 x 181 mmSpace saving sizePowerful motorFinely adjustable amplitude deflectionSurface coat finish for safe workingUp to three hours operating timeDesigned for continuous useQuick battery change systemTwo-year warrantyMade in Germany Specifications: 2 x Li-Ion battery 3.7 V / 1400 mAhNeedle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed approx. 9.500 rpmWeight with battery approx. 190 gr.Dimensions: D=25 mm L=181 mmBattery life in continuous operation approx. 2 - 3 hrs. 

A blade thickness of just 0.4 mm makes this slim pick particularly suitable for working in narrow keyways.  Pick for setting single pins in mid-depth positions. Thanks to its thin tip, this hook is well suited for working in low-profile keyways.This hook pick is a result of years of research and development. Based on various commercially available hooks, combined with mathematical calculations carried out for the first time and after final analysis of several prototypes, we were able to create the groundwork for this perfectly formed hook. Welcome to the professional league The ultimate lock-picks in worldwide unrivalled high-tech qualityFinest blades - high-quality spring steel - impeccable workmanshipFirst-class individual design - perfection in every detail100% Made in Germany - from Multipick of course We invite you to test it and see for yourself!  Specifications:Pick type: HookThickness: 0.4mmLength: 120mmWeight: 8gr.Blade material: High-quality spring steelHand grip material: High-quality stainless steel Our ELITE picks are rust-free thanks to a special hardening and tempering process.