Pick needle PN-2 (0.6 mm)

Pack of pick blades PN-1 (0.6 mm) 10 piecesIn response to requests from a large number of customers, we now offer a stronger version of our pick needles that are more forgiving and will not break when subjected to occasional beginner's mistakes.These pick needles can be used with all the electric lock picks we offer and also with the manual pick gun as well as the Multipick-System.Exceptional quality "Made in Germany" by ©Multipick 

This lock pick tips for our electric pick guns as well as for our numerous manual pick guns is particularly suitable for beginner lock-pickers. The tips, which are stronger in comparison to our other professional pick tips, are forgiving of handling by beginners, who at first tend to be somewhat over-motorised. Nevertheless, even professionals sometimes like to use this version as well. Test it for yourself! 

A blade thickness of just 0.4 mm makes this slim pick particularly suitable for working in narrow keyways. Lockpick from the half-diamond family. Suitable for picking single pins.This diamond offset lock pick represents years of research and development. Based on various lock picks which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted picks.Welcome to the professional leagueThe ultimate lock-picks in worldwide unrivalled high-tech qualityFinest blades – high-quality spring steel - impeccable workmanshipFirst-class individual design - perfection in every detail100% Made in Germany - from Multipick of courseWe invite you to test it and see for yourself!Specifications:Pick type: Diamond offsetThickness: 0.4mmLength: 120mmWeight: 8gr.Blade material: High-quality spring steelHand grip material: High-quality stainless steel Our ELITE picks are rust-free thanks to a special hardening and tempering process. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Securemme 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Securemme 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.4mm 

Pick blade for the Original Jackknife-Pickset by Multipick Our exchangeable Jackknife pick blades are tuned by their thickness of only 0.5 mm even for picking narrow cylinder locks.Made from German Hightech spring steelBrilliant quality “Made in Germany“ by ©Multipick  

Bump Keys - Set 1 AT (Austria) 11 pieces We exclusively produce high quality, long life polished bump keys made out of steel! We do not fear comparison with bump keys from any other manufacturer!