PYTHON snare 1500 mm

Our car openers for opening via the inside, in connection with the Lever Suction Cup Set, allow the fast and non-destructive opening of almost every type of car. A newly developed pulling mechanism, mounted in the handle facilitates the exact positioning within the car and a secure pulling of handles, knobs, etc. If necessary the tools can be bent, thus allowing to reach even difficult or hidden locking mechanisms. Car Hook - long: Developed for the pulling of door handles, keys left inside the car, etc. Given its length it is possible to reach all through the inside, even in the case of very broad cars. 2 pieces - collapsibleLength: 1900 mmCollapsed length: 1250 mmDiameter: 4 mm  Controllable hook1900 mm lengthdismountable using fine thread connection  

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers. 

Our car openers for opening via the inside, in connection with the Lever Suction Cup Set, allow the fast and non-destructive opening of almost every type of car. A newly developed pulling mechanism, mounted in the handle facilitates the exact positioning within the car and a secure pulling of handles, knobs, etc. If necessary the tools can be bent, thus allowing to reach even difficult or hidden locking mechanisms.Power-hook with sharp tip: This tool is often the only possibility to unlock vehicles with special door buttons, handles etc. A small gap is enough to insert the tool into the interior of the car and then control it and make it “bite” the handle/button using the rope.  Controllable hook900 mm length    

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

Handle levers are important tools in cases of mechanical defects of the lock. Unfortunately this type of problem is very common and presents a great challenge to locksmiths. With the help of the door handle lever the latch can be activated by pushing down the handle on the other side of the door, thus opening the door. This unique tool, therefore, is a very simple solution to a difficult problem. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs are also available with extrafine cross gearing HP-4 for harder kind of steel. Excellent control (also at difficult to reach positions):Smooth operationShort chipsGood surface finishMedium cutting action  For all kinds of steel:Up to extra hard steel ca. 70 HRCCast ironStainless steel (INOX)Heat-resistant substances, such as e.g. Nickel based + cobalt based alloys Conclusion: This fine gearing is the most suitable for extremely hard steel !!