Scale SO-1.6 for Disc Detainer Locks - Opener

These scales are used for unlocking disc tumbler-/disc detainer locks. They are available in different graduations. Also here, the selection of a scale depends on the type of lock you want to open. This scale corresponds to the graduation 2.0mm . 

The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10.  The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. More models are being planned. 

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. 

 

You find our G-Pro dimple lock picks great, but would like to have bigger, thicker handles? You are not alone in the lock picking community. That's why we now have a limited edition with bigger, thicker handles and an additional marking indicating the index point. This provides you with two practical advantages simultaneously. Easier to hold the pick (especially advantageous for bigger hands) and the index point is always in view. In this way, you will always be able to locate the next pin. The handles and the compilation of the kit were done in collaboration with Lock Noob, and have been additionally surface-treated by us in order to make the surface more scratch-resistant. The new kit is only available for a limited time, exclusively and only from us. So be quick, because as always, only while stocks last. The ELITE G-PRO are characterised by: Finest polished tips in many variations for the widest range of locks Maximum feedback - maximum feel of the pin movement to the user Highest level of resistance, especially with the last pin, due to the special handle shape Non-slip, fatigue-free handles made of rubberised aluminium Exchangeable and individually available dimple flags 100% Made in Germany, Made in Bonn 

Now we're topping it up a bit Something that was impossible for most a while back is now becoming a reality: Controlled practice to defeat the difficulties of a dimple cylinder lock. Thanks to their adaptable design and side slots, our training locks are perfect for educating yourself how to pick difficult cylinder locks, such as dimple pin locks. This is the perfect lockpicking training for both personal and professional use. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The required set of pins including a pair of tweezers is included in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Always adapt your training to further improve your skills. If you are looking for more challenges, you can order additional sets of pins in various sizes as accessories from our shop. These sets include many more key pins and driver pins as well as spool pins, security pins and springs, of course. For the best and most secure lockpicking practice, we recommend our Centurion vise. The Centurion provides a secure hold for your training cylinder and helps you to concentrate solely on picking. The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:- Train like a pro and progress from novice to a professional- Complete dimple lock super set with accessories for yet more possibilities- Learn and understand more through the half-open design of the dimple pin training cylinder- Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm Weight: 240 gramsWhen you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.