SDB-Pick-003-3.1 for Dimple Locks - Opener

Here we are looking at different "Dimple pin picks" required for setting the pins in the lock. We currently offer 5 different picks. These differ in the design and shape of the "flags". Depending on the requirements, the corresponding pick is used. For this purpose, we have also created a table to make it easier for you to choose the right pick. 

Here we are looking at different "Dimple pin picks" required for setting the pins in the lock. We currently offer 5 different picks. These differ in the design and shape of the "flags". Depending on the requirements, the corresponding pick is used. 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 12.70 mmShank length (outer): 16.70 mmWidth: 4.0 mmWidth of the shank: 3.05 mmWidth of the shank tips: 2.3 mmThickness: 0.8 mmTotal length: 76.20 mmWeight: 3.0 g 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

Wilka- W 3600 ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Wilka- W 3600 cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Wilka- W 3600, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

Here we are looking at different "Dimple pin picks" required for setting the pins in the lock. We currently offer 5 different picks. These differ in the design and shape of the "flags". Depending on the requirements, the corresponding pick is used. For this purpose, we have also created a table to make it easier for you to choose the right pick. 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.4mm