Tension Tool for modern Laser Track Car Locks

This professional tension tool can be used universally for almost every car lock because of its cuts of different width (see picture). A definitely recommendable tool for the manipulation of car locks. The tension tool also offers great support when using car jigglers (Artikel 33600 + 3350). 

After the shim has separated the upper and lower pins in the cylinder, the plug follower (Ø 13 mm) is applied from the opposite side of the cylinder to remove the cylinder plug out of the housing without losing the pins and springs. Plug followers come in handy when rekeying locks. 

Very high quality special lever pick, hand-made for warded locks. Lavishly cut and polished, it guarantees an extremely easy handling.  

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

This newly developed version of the fork pick for vehicle disc tumbler locks was specially designed for unlocking disc tumbler locks used on car locks, scooters and motorbikes. In addition, this pick is also suitable for unlocking padlocks and most common double-sided disc tumbler locks.Precision design - High-quality spring steel - 100% Made in Germany - From Multipick, of courseTechnical data:Pick type: Fork pickPick blade thickness : 0.6 mmLength: 132 mmWeight: 8 gPick blade material: high-quality spring steelMaterial full handle scales: high-quality stainless steel 

A new design of the Tibbe-Pick allowing the manipulation of locks with 6 discs. The innovative construction allows moving each disc with an individual feeler. The user will not have to identify the position of each individual disc, because after insertion each feeler is at its optimal position automatically. This design allows decoding the opened lock.The car opening tool comes in an especially produced real leather case with press button. 

The Flip-It - a development with high utility value Now in a revamped version for even more precise triggering and better handling For the new Flip-It we did not only concentrate on an extraordinary design, but also on the mechanical precision of the trigger system. What always disturbed us with other plug spinners on the market was that they tend to jam when trigered, which prevents the free turning of the cylinder core over the dot. This problem is principally due to a careless finish of the trigger mechanism, often coupled with cumbersome fixation of the control element. The engineers of Multipick took over this problem into consideration and found a perfect solution. The mechanism of the new Flip-It enables the “shot” release, simply through a gentle push of the trigger button. The advantage is that you can work without the exertion that was generally necessary until now. This tool enables precise and calm working. The Flip-It impresses with its highly qualitative aircraft grade aluminium (EN AW-7075) production. This product, with its combination of spring steel, proved for durability, and rubber rings of silicium, for non-slip guaranty, is an absolute highlight and an essential tool for any Lock pickerFine precision engineering "Made in Germany" by ©Multipick