Tensioner MOS-SPT2 for disc detainer locks

The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10.  The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. More models are being planned. 

Disc detainer locks are mainly padlocks and bicycle locks. The area of deployment is broad and can be found all over the world. With the ARES from Multipick and a little practice, you will be able to open almost any disc detainer lock. Furthermore, we offer common scales for Abus and Abloy. The difference is mainly in the graduation of 2mm (Abus, Abloy) and 1.6mm (Abloy). The scales are guides to make it easier to find the positions of the individual discs. The graduations already mentioned are the most widely used on the market. Of course, you can also use the scales for any other disc detainer lock. However, the graduation can then only be used as a reference. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer locks. With this set you will be able to open even tough locks. The basic module offers you the possibility to modularly expand your system.  Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, as used in all our products. In order to achieve smooth running between the tensioning tool and the setting tool, a sliding sleeve has been integrated. A clear laser marking of the corresponding components ensures precise orientation during operation. More control can be achieved by individually screwing the handles included in the scope of delivery into the basic module. These are necessary in some cases, especially when using the drill recess version. Changing the individual components, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

The so called disc setter with tensioner is used for disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. 

The so called tensioner is one of two components that is used with disc tumbler-/disc detainer locks. We currently offer 2 models here: T2 and T10. The T2 model is designed in such a way that the tensioner is inserted into the keyway as far as it goes in order to achieve pre-tensioning in the lower part of the keyway. The T10 model works the other way round. Here the tensioner is only inserted partly into the keyway and the pre-tension is induced on the upper part of the keyway. 

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

Abus- D6XARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Abus- D6X cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Abus- D6X, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

Pick blade for the Original Jackknife-Pickset by MultipickFor perfect supplementing the Jackknife pick sets Exclusive Edition by Multipick we provide 17 different possibilities to personalize your Jackknife pick set according to your wishes and imagination. Often requirements to a tool are very special. So it’s brilliant to have the possibility to assemble a “personalized” tool. The German heavy-duty steel which we use is a highly hardened and tempered metal alloy, unique on the world market. To our knowledge there is no other producer - a part of Multipick -, who uses such a high quality material for pick manufacturing. We are not going to divulge any details, but we are sure that you won’t find the same elsewhere. By precise production in our manufactory changing the blades is “a piece of cake“. The single blade modules made from German high-end steel can be integrated into your Jackknife pick set in a breath. Simply loosen the Allen screw and change the respective blade module. Thus you are optimally prepared for all picking mission, howsoever tricky. Multipick is essentially committed to production of German high-end tools. We disapprove of cheap tools with minor to bad quality, partially produced in low wage countries under inhumane conditions. Multipick clearly speaks up for German high-class workmanship. Therefor our products are elaborately manufactured according to German quality standards. We only guarantee for extraordinarily high material and manufacturing quality on Multipick labelled products! High-end material with perfectly functioning even after many missions - We do not sell steel scrap squeezed into shape, since we develop for the future. Made in Germany - Made in Bonn.