Triple Gauge Set 0.4 to 0.6 mm & Turners - Lock Noob

You find our G-Pro dimple lock picks great, but would like to have bigger, thicker handles? You are not alone in the lock picking community. That's why we now have a limited edition with bigger, thicker handles and an additional marking indicating the index point. This provides you with two practical advantages simultaneously. Easier to hold the pick (especially advantageous for bigger hands) and the index point is always in view. In this way, you will always be able to locate the next pin. The handles and the compilation of the kit were done in collaboration with Lock Noob, and have been additionally surface-treated by us in order to make the surface more scratch-resistant. The new kit is only available for a limited time, exclusively and only from us. So be quick, because as always, only while stocks last. The ELITE G-PRO are characterised by: Finest polished tips in many variations for the widest range of locks Maximum feedback - maximum feel of the pin movement to the user Highest level of resistance, especially with the last pin, due to the special handle shape Non-slip, fatigue-free handles made of rubberised aluminium Exchangeable and individually available dimple flags 100% Made in Germany, Made in Bonn 

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

A lockpick designed for lifting pins.This straight lock pick represents years of research and development. Based on various lock picks which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted picks.Welcome to the professional leagueThe ultimate lock-picks in worldwide unrivalled high-tech qualityFinest blades – high-quality spring steel - impeccable workmanshipFirst-class individual design - perfection in every detail100% Made in Germany –  from Multipick of courseWe invite you to test it and see for yourself!  Specifications:Pick type: StraightThickness: 0.6mmLength: 120mmWeight: 8gr.Blade material: High-quality spring steelHand grip material: High-quality stainless steel Our ELITE picks are rust-free thanks to a special hardening and tempering process. 

This tension tool was created, especially for tensioning in front of the pins, so that there will be more room to work within the keyway. This type of tensioning technique is the preferred option for almost all cylinder locks when it comes to pick opening. Various sizes and gauges ensure that the tool sits perfectly and there is also a choice to match a wide range of profiles. All tension tools in this Champion series are rigid in order to give optimum feedback when picking. Dimensions:Length: 77 mmWidth: 2.35 mmThickness: 0.80 mmSide length (inner): 6.30 mmSide length (outer): 7.10 mm 

The Multipick ELITE SHANK quickly opens a large variety of everyday locks including most Filing Cabinets and Tool Chests! When used properly the SHANK will open the lock within seconds without any damage. Simply insert the SHANK through the key way and wiggle while turning the knife releasing the locking pawl and opening the lock.The Multipick ELITE Shank works on the following models and many more:File Cabinets & Tool ChestsHonWaterlooHudsonStanleyS&GYaleChicago6842CraftsmanEagleHuskyFraim PadlocksSlaymakerHerculesLudell,Master 77Sargent 752HS & 753HSTaylor 781 padlocks 

The perfect combination of a Euro profile cylinder and a Dimple cylinder - unique and only from Multipick Something that was impossible for most a while back is now becoming a reality: Controlled practice to overcome the difficulties of a Dimple cylinder and a Euro profile cylinder. Thanks to the modular structure and side slots, our training locks are perfect for educating yourself how to pick difficult cylinder locks, such as dimple and euro profile locks. This is the perfect training tool for lockpicking at home and at work. Dimple or Euro profile? - Both! This practice lock literally has two sides: One side features a Euro profile and the other a Dimple profile. Variation and versatility are the most important characteristics of this model. You can always choose the appropriate cylinder and only have to decide which profile you want to use. Even the standard pin version of this practice lock is quite a challenge and requires a lot of know-how to pick it. If you wish to increase the difficulty or make it less challenging, then you can decide for yourself the degree of difficulty at any time by means of the fastening screws. Re-pinning the practice lock is easy peasy: Simply loosen the grub screws with the provided allen key and replace the springs and pins. After that, simply screw the grub screws back in and your new challenge with your training lock is ready. The set contains the required set of pins including a pair of tweezers in the scope of delivery. In this way, you can instantly adapt your training cylinder to your own needs. This makes this exercise lock a real challenge with countless possibilities. Practice in a varied way to keep your skills improving. If you are looking for more challenges, you can order additional sets of pins in various sizes as accessories from our shop. These sets include many more key pins and driver pins as well as spool pins, security pins and springs, of course. For the best and most secure lockpicking practice, we recommend our Centurion vise. The Centurion provides a secure hold for your training cylinder and helps you to concentrate solely on picking. The cylinder in this set is slotted on one side. The other side is kept as it is in order to increase the level of difficulty. This gives you the choice of whether you want to exercise visually or without seeing anything. A training lock that offers a wide range of possibilities and will take your lockpicking skills to a new level. Without any exception, only very high quality and precise cylinder locks are used for the production. Brilliant and precise fine mechanics from Multipick - Made in Germany, Made in Bonn. Features:Complete super set with top accessories for added possibilitiesStart immediately and celebrate your first achievementsTrain like the pros - progress from novice to professionalBecome quickly successful - What you see is what you do - learn and understand!Compatible with our pinning kits available in our shop Dimensions: 30 / 10 / 30 mm When you use an electric lock pick gun with our practice locks, it is important to check the grub screws regularly because they can loosen due to the strong vibrations.