Universal Key "short"

The door can be unlocked with the universal key after removing the cylinder. The calibration to determine the length of the cylinder is very practical. Version: metal. Art-No. 2030 Universal Key “long”Art-No. 2031 Universal Key “short” 

Multipick Multifunction-Key with magnetic bit supportThe allround key for opening, closing, measuring, testing, mounting. Also an ideal advertising gift.The ideal tool for:ElectriciansFacility managementJanitorsHouseholdsPaintersMasonsMechatronicsMetal constructionPolice and FiremenPlumbersLocksmithsSecurity companiesCarpentersAll craftsmenAllows the Opening / Closing of (Compatibility):Square Holes 6-10 mmInside square 5,7,8* mmInside triangular 8*,9 mmFlat and Philips screwUniversal key for all profile cylinder locks* included adaptor  Other functions:Measuring the length of the appropriate profile cylinder length 22 to 90 mmVenting of radiators / heating elements Made of:Zinc alloy pressure die castingNickel-platedFeaturing a magnetic bit support 

Multipick Special Lock Snapper for Profile Cylinders. This very compact tool is made of solid steel of high quality. The adjustable clamp adaptor which has a profile on the inside will grip the cylinder and break it easily even with very little spacing (only approx. 2 mm required). Made of steel with black oxide finish. Weight 1.35 kg. Delivery includes 1 Allen key (6 mm) for the adjustment of the clamp. 

Fine, high quality spring steel with aluminium handle to push the cylinder coupling in and to carry on the cam if the picked plug is spinning. Suitable as well for manipulation as for destructive openings (drilling).   

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers. 

This lock cracker breaks even cylinders only slightly projecting thanks to a powerful clamp which is acting from underneath. With this tool you may facilitate the cylinder cracking by inserting a special pulling screw into the cylinder which prevents the lock cracker from slipping off. You remove the tool head from the shaft, place and fix it on the cylinder. Then you screw a suitable special pulling screw into the cylinder, using a Torx 20 bit, 50 or 70 mm long (Article: 2128 + 2129). 

The HOT SHOT Kit Prime-Cut has been revamped by BROCO.The manufacturer has added a spacious, higher quality carrying case that holds additional gear such as a regulator, clothing and everything else needed to get the job done. The welding gloves were also upgraded and the glasses were replaced with a protective mask. The central unit of the BROCO HOT SHOT kit Prime-Cut consists of the handle for the lances, which holds the burning rods with special collets and the integrated oxygen valve to regulate oxygen supply towards the end of the lances. The 3 meter long oxygen pipe, which is connected to the handle, is to be connected to a conventional oxygen pressure regulator. We screw the set together fitting to the European standards.(Pressure regulator and oxygen bottle are not included in the set)Functioning:The following articles and accessories are required to work with Hot-Shot thermic lances:Art-No 60300 - Hot-Shot KitBattery with min. 12 volt and 10 Ah. A battery for motorbikes with these characteristics is sufficient.Oxygen bottle (the size depends on the quantity of material you want to cut and existing means of transport /space.Pressure regulator for oxygenAppropriate quantity of thermic cutting rods for the planned application Connect the pressure regulator to the oxygen bottle and the end of the oxygen hose to the exit of the pressure reducer. The clamps of the strike plate and the handle of the tool are connected to the battery according to the colour code (red to +, blue to -). Select the appropriate cutting rod and collet depending on the object you want to cut. Unscrew the nut of the handle in order to place the collet then tighten the nut slightly. Now place the thermic rod in the collet (the hollow end of the rod must be placed in the collet/handle) and tighten the nut completely. Now open the valve of the oxygen bottle and adjust the level of oxygen pressure using the pressure reducer. Now touch the strike plate with the tip of the thermic rod in order to create short circuit sparks. Push the mechanism of the handle, in order to let the oxygen flow through the cutting rod and thus igniting the rod. It is possible to adjust the oxygen pressure again in order to start cutting. The higher the oxygen pressure /throughput, the higher the temperature at the tip of the rod. While higher temperature allows faster cutting it will also result in a faster burning of the thermic rod. In order to cut, place the tip of of the rod directly on the surface of the object you want to cut.  When selecting the thermic cutting rods to be used keep in mind that the diameter of the rod and the length of the rod, in combination with the oxygen pressure used, influence the speed of the cut. The oxygen pressure that is optimal depends on the material that is to be cut. The producer recommends the following approximate oxygen pressures for different types of metals: 0.6 - 1.4 bar for the punc  turing hard metal plates1.5 - 3.0 bar for the cutting of steel plates up to 0.7 mm thickness3.0 - 3.5 bar for the cutting of steel plates up to 15 mm thickness3.5 - 4.2 for the cutting of steel plates from 15 mm to 50 mm thickness4.2 - 5.5 for the cutting of steel plates over 50 mm thickness Unfortunately the producer does not give recommendations for the cutting of concrete, bullet proof glass or other materials. Users can quickly find out the optimal oxygen pressure through some short testing, though.