ELITE single-sided TOK tension wrench (SP56) 1.3 mm

Single-sided tension wrench Specifications:Side length (outer) = 7.4 mm / Width = 2.3 mmMaterial thickness = 1.0 mmTotal length = 76.2 mmWidth: 2.3 mm 

Single-sided tension wrench Specifications:Side length (outer) = 7.1 mm / Width = 2.3 mmMaterial thickness = 0.8 mmTotal length = 76.2 mmWidth = 2.3 mm 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 6.26 + 12.6 mmShank length (outer): 10.26 + 16.6 mmWidth: 4.0 mmWidth of the shank: 3.4 mmWidth of the shank tips: 2.28 mmThickness: 1.3 mmTotal length: 76.20 mmWeight: 4.0 g 

Single-sided tension wrench Specifications:Side length (outer) = 13.7 mm / Width = 3.0 mmMaterial thickness = 1.0 mmTotal length = 76.2 mmWidth: 3.0 mm 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily, and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 2.8 mmShank length (outer): 6.8 mmWidth: 4.0 mmWidth of the shank: 2.3 mmThickness: 1.3 mmTotal length: 76.20 mmWeight: 4.0 g