Skip to main content Skip to search Skip to main navigation
Kostenloser Versand
Versand innerhalb von 24h
30 Tage Geld-Zurück-Garantie
Bequemer Kauf auf Rechnung
Hotline 0800 123 454 321

HSS-G Spiral Drill Bit "Pittbull-Guider" - 4.8 mm

Product information "HSS-G Spiral Drill Bit "Pittbull-Guider" - 4.8 mm"

HSS-G Spiral Drill Bit "Pittbull-Guider"

High quality metal drill bit especially intended for use with 6mm pull screws. The hexagonal shaft enables it to be quickly inserted into any universal bit holder. For optimum results, use with a cordless drill, can also be used with conventional 3 jaw drill chuck.

 

 

Measurements:

  • Diameter (Ø): 4.8 mm
  • Length: 59 mm
  • Max. drilling depth: 34 mm
  • Point angle: 135°
  • Hexagonal shaft: ¼"

 

The listed prices refer to 1 piece, respectively.

 

 
Eigenschaften "HSS-G Spiral Drill Bit "Pittbull-Guider" - 4.8 mm"
Drill Bit Ø: 4.8 mm
Tempering: HSS
Manufacturer "Multipick"

Multipick Direct GmbH
Godesberger Str. 51
53175 Bonn
Germany
Telephone: +49 228 39187 60
Telefax: +49 2283918741
E-Mail: [email protected]

     

    0 of 0 reviews

    Average rating of 0 out of 5 stars

    Leave a review!

    Share your experiences with other customers.


    Kunden kauften auch

    In stock
    AUDI VW HU66 GEN.1 - ORIGINAL TURBO DECODER
    AUDI VW HU66 GEN.1 - ORIGINAL TURBO DECODER
    MULTIPICK SPECIAL EDITION - TURBO DECODER HU66 Generation 1 for model years up to 2006 and partly earlier models. Opens AUDI - VW - SKODA - SEAT - PORSCHEThe TURBO DECODER SPECIAL EDITION is a professional tool for opening, closing and decoding modern vehicle track locks.The latest generation of the Turbo Decoder series is a further development from the experiences gained out of the previous Turbo Decoder generations.New manufacturing processes, fine modifications and enhancements on the components were made. The result is a further increased functional quality and service life.Multipick offers for Turbo Decoder SPECIAL EDITION: Consulting and Sales - Training – After-sales maintenance and Repair - Warranty Note!The Turbo Decoder is a high-precision tool which is capable of opening vehicle locks without any force. Use of brute-force does not unlock but destroys the tool.HU66 is the technical short name given to the key profile from SILCA. This term is understood internationally by all specialists and experts.The tester key shows which lock type is installed on the vehicle and how the Turbo Decoder should be inserted into the lock.The setup tool resets the Turbo Decoder's pins to the initial starting position. A "reset" is required for each and every new opening.On YouTube, extensive video material is available on how to open a car lock with a Turbo Decoder. However, this does not fundamentally replace the required fine motor skills under expert guidance. 
    Produktnummer: 333005SE
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $591.95custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Multipick Kronos EPG – The electric pick gun for all
    Multipick Kronos EPG – The electric pick gun for all
    Kronos (Master Key) Electric Lock Pick Gun - The electric lock pick for a bargain price from Multipick We have gathered all our experiences from the development of the MHP II and invested it in KRONOS. The result is an electric lock pick that does not need to be hidden away behind its big brother. KRONOS provides state-of-the-art electronics with a powerful motor. Further, we were able to gain one of the largest German manufacturers of DC motors and involve them in the development. During our endurance tests KRONOS has impressively proven all its power. Today we are able to present you an electric pick with cutting-edge technology. Due to its improved motor and low natural vibration, KRONOS is one of the quietest (if not THE quietest) e-picks offered worldwide. A real plus if you still need to open a cylinder at four in the morning.Thanks to its new power management, you will be able to achieve a continuous load of more than two hours. That’s enough to unlock a vast number of cylinders. Charging has never been so easy!Simply connect the included USB cable to a power supply, car cigarette lighter port or computer and charge KRONOS. That messy jumble of different cables is now history. One cable, many possibilities - that´s how it works nowadays. If necessary, please order the charger separately.We also supply the Kronos storage & carrying case (Prod.No.: 12570) as an accessory. The Kronos EPG is safely protected by the cut-out soft foam insert, and the case also offers space for a circular tension ring and the original Flip-It plug spinner.By the way, the included pick needles are made from the exact same, ingenious material as our ELITE picks.Technical specifications:Li-Ion battery 3.7 V / 2900 mAh  Needle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed 13,000 rev/minWeight with battery - approx. 350gDimensions: D=34 mm L=205 mmBattery life approx. 2.5 hours 
    Produktnummer: 12550
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $157.16 *
    $216.45custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Kronos Complete Electric Lock Pick Set
    Kronos Complete Electric Lock Pick Set
    The unbeatable Electric Lock Pick Set from Multipick!Outstanding quality from Germany!We are now also offering the popular Multipick Kronos EPG as a complete set with a large assortment of useful auxiliary tools. A hard-shell plastic case with appropriate recesses provides for secure storage; there is an additional small hinged plastic box for bits and pieces.The Kronos provides you with the most modern electronics coupled with a high-performance motor. Because of its low inherent vibrations, the Kronos is one of the most quiet (if not the most quiet) electric lock picks offered anywhere in the world. A genuine plus if you still have to be picking a cylinder lock in the early hours of the morning. Further we were able to convince one of the largest German manufacturers of DC motors to collaborate with us. Thanks to its newly designed power management system, the Kronos EPG is able to operate under steady load for more than two hours.Charging has never been so easy! Simply connect the accompanying USB cable via the included mains adapter or to a computer and recharge the Kronos without the tangle of various different cables. One single cable with many possibilities — that’s how we do it nowadays! An additional rechargeable battery delivers the needed “power” when the situation demands it. What’s more, the accompanying pick needles are manufactured out of exactly the same ingenious material as our ELITE lock picks.Important and useful accessories that one otherwise would have to buy separately, are also provided in this complete kit.So, to name just a few, there is the Circular Tensioner TNT-20-V3 for a quick change in the direction of tension. The TNT-20-V3 is the only circular tensioner anywhere in the world that offers the possibility of adapting precisely through a quick and tool-less change of the lower tension pin to different respectively curved cylinder profiles. Change pins for straight, left- and right-sided curved cylinder profiles are included as part of the delivered content.The Flip-It (Multipick-Original) - a further development with an extremely high utility value. With the new Flip-It, particular value was placed not just on its unusual design, but also on the mechanical precision of the “trigger system”. The mechanism in the new Flip-It makes it possible to “shot release” by just applying “light pressure” on the trigger button. The advantage this mechanism provides is that; one can work without the “exertion” that was generally necessary until now. This spinner thereby makes it possible to work very calmly and precisely.In addition to the standard ELITE pick needles (0.5 mm), a five piece needle set in 0.6 mm thickness is also provided. This thicker version is more forgiving of beginner mistakes by not breaking so quickly.Just take a look at everything that comes with this set — there are no more useful accessories than these!Nor would you expect anything less in this Kronos Complete Product Kit  “made in Germany” by Multipick. Technical specifications - Kronos:Li-Ion battery 3.7 V / 2900 mAhNeedle deflection precisely adjustable from 1 to 4 mm at the needle chuckIdle speed 13,000 rev/minWeight with battery - approx. 0.350kgDimensions: D=34 mm L=205 mmBattery life in continuous operation: approx. 2.5 hours 
    Produktnummer: 12600
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $418.16 *
    $418.16custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Suction Cup 105mm 40 Kg lifting capacity
    Suction Cup 105mm 40 Kg lifting capacity
    Suction Cup with up to 40 kg vertical lifting capacity and handle in 2 parts. Diameter 105 mm. This suction cup is well suited for the opening of cars, too.  
    Produktnummer: 66007
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $12.46custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Keil Universal drill GOLDCRAFT 3.0x40 mm
    Keil Universal drill GOLDCRAFT 3.0x40 mm
    Universal drill with drilling diameter 3.0 mm, drilling length 40 mm, total length 70 mm, shank diameter 2.8 mm 
    Produktnummer: 119000030
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $4.84custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Keil Universal drill GOLDCRAFT 4.0x40 mm
    Keil Universal drill GOLDCRAFT 4.0x40 mm
    Universal drill with drilling diameter 4.0 mm, drilling length 40 mm, total length 75 mm, shank diameter 3.6 mm 
    Produktnummer: 119000040
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $4.84custom.netPriceLabel
    excl. shipping costs
    Available ex stock

    Kunden haben sich ebenfalls angesehen

    Nur 3 auf Lager!
    Cobalt-Drill Set 25 pcs. 1-13 mm
    Cobalt-Drill Set 25 pcs. 1-13 mm
    Special Cobalt Drills - Heavy Duty Splitpoint DIN 338 Set 25 pcs. 1-13 mmThese cobalt alloy drills are the almost perfect drill bits for locksmiths. The splitpoint minimizes “bit walking“. These heavy duty drills are recommended for drilling hardened steel, super alloys, titanium and stainless steel. The 5% cobalt of these solid drill bits guarantees a much higher hot hardness and abrasion resistance. Cobalt Drills with Splitpoint - Set 25 pcs. in metal case,1.0 - 13.0 mm, sizes increase in 0.5 mm steps.    
    Produktnummer: 552001
    only 3 available

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $142.01custom.netPriceLabel
    excl. shipping costs
    only 3 available
    Nur 3 auf Lager!
    Cobalt-Drill Set 19 pcs. 1-10 mm
    Cobalt-Drill Set 19 pcs. 1-10 mm
    Special Cobalt Drills - Heavy Duty Splitpoint DIN 338These cobalt alloy drills are the almost perfect drill bits for locksmiths. The splitpoint minimizes “bit walking“. These heavy duty drills are recommended for drilling hardened steel, super alloys, titanium and stainless steel. The 5% cobalt of these solid drill bits guarantees a much higher hot hardness and abrasion resistance.Cobalt Drills with Splitpoint - Set 19 pcs. in metal case,1.0 - 10.0 mm, sizes increase in 0.5 mm steps.     
    Produktnummer: 552000
    only 3 available

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    previous price: $79.23 *
    $79.23custom.netPriceLabel
    excl. shipping costs
    only 3 available
    In stock
    Locking Pivot Puller for Windows, left & right
    Locking Pivot Puller for Windows, left & right
    With this revolutionary tool, plastic windows that are shut can be opened from outside without destroying it. First, by means of a latch opening card or an opening needle, the position of the roller pin or mushroom head lock is determined. Next, the pivot puller is inserted into the rebate, then pushed upwards and "tilted" backwards to grip the pivot / mushroom head lock. With this revolutionary tool, plastic windows that are shut can be opened from outside without destroying it. The first step is to locate the position of the pivot or mushroom head lock by means of a latch opening card or an opening needle. Next, the pivot puller is inserted into the rebate, then pushed upwards and "tilted" backwards to grip the pivot / mushroom head lock. Finally, the provided flat ribbon is inserted through the handle eyelet and "knocked" downwards with a round object, causing the window handle to move into the open position. Attention! Cannot be used with wooden windows, as these always consist of a double rebate. 
    Produktnummer: 33962
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $125.72custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Keil Universal drill GOLDCRAFT 10.0x135 mm
    Keil Universal drill GOLDCRAFT 10.0x135 mm
    Universal drill with drilling diameter 10.0 mm, drilling length 135 mm, total length 200 mm, shank diameter 8.7 mm 
    Produktnummer: 219000100
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $13.20custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    DBB-2 Morticer Set with 3 carbide tipped cutters
    DBB-2 Morticer Set with 3 carbide tipped cutters
    This professional tool is very popular to locksmiths, alarm system fitters and joiners. For anyone who regularly fits mortice locks it will prove invaluable - an accurate, speedy and professional tool that will save time and money. The tool allows the finishing of a mortice in a few minutes without removing the door.Offset doors: DBB Morticer can also be used on offset doors. The housing has slits allowing it to move the right and to the left, giving it the possibility to work on offset and double offset doors. It also cuts for hinges and striking plates on door frames of 95 mm thickness maximum.You may easily produce mortices for hinges and striking plates on door frames. (maximumof 95mm thickness).Carbide Tipped Mortice Cutters for wood: Compared to the previous design, these improved carbide-tipped mortice cutters increase the cutting speed by up to 50% and keep their sharpness longer. The simplified screw-on ‘anti-lock’ design enables the cutter to be released quickly using the spanner provided. All in all there are twelve cutters available.Aluminium doors: Separately we offer 4 different sizes of aluminium cutters, allowing work on aluminium doors without any problem.Always wear gloves and safety glasses when working on metal!Plunging Cutters: These new cutters are ideal for installers who need perfectly drilled true holes. Ideal for the quick installation of Tubular Latches, Deadbolts, Concealed Door Closers etc. The range of 4 sizes of ‘Plunging Cutters’ are designed for locks where perfect installation is an issue. Made from High Speed Steel, these very effective 3 point plunging drills are a real bonus for those wanting to solve installation problems.Small Bore Kit: This system has been developed especially for small mortices. The smaller cutters require a thinner shaft and a special housing kit.Long Drill System: The long Drill Kit has been specifically designed for the easy installation of electric lock cables through wooden doors - from lock to hinge.After cutting the mortice you convert the morticer into the long drill system. Special geometry helps to keep the cutter 'on line' with minimal effort. The Long Drill Kit is a leader in its field. It is quick, accurate and easy to use. Characteristics:Cuts mortice for lock and face plate.Fast and accurate on doors from 40 mm - 85 mm thick.Increased cutting speed of up to 50% thanks to carbide tipped cutters.Cuts mortices for hinges, some striking plates and electric releases.The ‘anti-lock’ design enables the cutter to be released quickly.Uses vertical guides, height and depth stops to ensure precise cutting.Wide range of accessories.Robust construction and precision manufacturing.  Advantages:The morticer can be operated by one person.Doors don’t have to be removed which saves time and money.Increases accuracy and speed of mortice cutting.Can be used on wooden and aluminium doors.Only requires a power drill to work.  Technical details:Max. working depth for mortices: 180 mmMax. working depth for long whole mortices: 1250 mmMax. working depth for small whole mortices: 100 mmMax. thickness of door: all  Requirements for drilling machine or electric screw driver:Chuck: 13 mmRpm: 2000-3000  
    Produktnummer: 65000
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $149.66custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    Special drill bit for vaults 13.0 x 370 mm
    Special drill bit for vaults 13.0 x 370 mm
    Special Drill Bits for Vaults (Hard Plate V Tip®) 13.0 x 370 mmThese special drill bits are very well suited for the drilling of very hard materials. With their special notched carbide tip they drill up to 50% faster through these types of materials compared to traditional drill bits.Shank Diameter: 9.25 mm 
    Produktnummer: 55265
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $37.77custom.netPriceLabel
    excl. shipping costs
    Available ex stock
    In stock
    BLUE-TEC 8/6x170/20 mm (HP-4)
    BLUE-TEC 8/6x170/20 mm (HP-4)
    BLUE-TEC: The new generation of milling burrs especially for locksmiths better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! Dimensions: d1=8mm  d2=6mm  l1=170mm  l2=20mm The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs are also available with extrafine cross gearing HP-4 for harder kind of steel. Excellent control (also at difficult to reach positions):Smooth operationShort chipsGood surface finishMedium cutting action  For all kinds of steel:Up to extra hard steel ca. 70 HRCCast ironStainless steel (INOX)Heat-resistant substances, such as e.g. Nickel based + cobalt based alloys Conclusion: This fine gearing is the most suitable for extremely hard steel !! 
    Produktnummer: 115022-080
    Available ex stock

    Available, delivery time: Delivered within 1-9 days, depending on shipping method and country of delivery

    $29.18custom.netPriceLabel
    excl. shipping costs
    Available ex stock