Latch Opening Card Double-Offset Doors (black) 0.50 mm

Patented Opening Cards for Single and Double-Offset DoorsHaving to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on …The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (Art.-No.: 2320), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use. 

The door lever is an easy to use tool for lifting up doors. Very suited when using the latch opener set for double-offset doors and in many other situations. 

Latch Opening Cards for Double-Offset Doors Patented Opening Cards for Single and Double-Offset Doors. Having to open closed but unlocked double-offset doors locksmith may face various problems such as a very tight gap between door and frame, a latch that is difficult to move, a broken latch and so on … The advanced technique this tool uses, allows the opening of double-offset doors even in very difficult cases. Also closed but unlocked single-offset doors or difficult emergency exit doors (where the latch may be found at a great distance from the door blade) can be opened without greater efforts. For the easy insertion of the card between door and frame we recommend the use of the Door Lever (see end of this page), a tool that is also helpful in many other situations. Delivery includes two different cards of 0.35 and 0.50 mm. Replacement cards not including the handle are available. The cards are made of a special plastic and designed for long term use. 

The new Latch Opener Set (2 pieces: 1x 1.5mm and 1x 1.75 mm, made of spring steel wire, with handle) is especially designed for the opening of double-offset doors. After pulling the door out of its frame for a little distance, using the Multi-Opener, Door Lever or Suction Cup etc., the appropriate latch opener is inserted into the gap and pulled up into the direction of the latch. Be careful not to rip out the sealing while doing so. When touching the latch with the tool’s tip, twist the tip of the tool against the latch and the door will open. 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

New cutting-edge design, new top features - unique! – The Centurion from MultipickNow also suitable for the North American market!The Centurion is a new, enhanced product from the ©Multipick brand and is manufactured with the latest CNC milling machines using high-quality aircraft aluminum. The Centurion is "the" next generation high-tech cylinder holder. The brilliant design combined with a high-quality surface makes the Centurion always look outstanding. The elegant and massive base of the solid milled foot provides a secure and firm footing. The small rubber studs on the base of the Centurion secures it against slipping on virtually all surfaces during picking. However, in the event of extreme “pick attacks”, the supplied table clamp can prevent the Centurion from slipping. The newly milled cylinder mount is milled perfectly to fit all Euro profile cylinders and demonstrates only minimal play. In addition, the cylinder is secured on the top by a knurled screw which completely eliminates slipping and allows you to concentrate fully on the cylinder and its opening.North American users can now also benefit from the additional mounting capability of the cylinder.Further, if you’re looking for a high-quality practice cylinder, we recommend the model sets TCS-SET and TCSS-SET respectively. The sets are manufactured by ©Multipick and are the perfect complement to the Centurion.You are welcome to let us engrave your centurion individually. Image, drawing or even names can be engraved. ©Multipick works with the most modern laser technics and can place all kinds of subject under the laser.You are welcome to contact us for more information. Colour: Aluminium (EN: AW-7075)The centurion is delivered in parts. A fitting Allen Key of 3 mm is included. Dimensions: Height: 215 mmLength of the pillar: 185 mmDiameter of the pillar: 37 mmBase (triangle): 145 x 145 x 145 mmWeight: 0.924 kg Fine precision engineering "Made in Germany" by ©Multipick  

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited.