Scale for Dimple Locks - Opener BO-3.4

The different key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins. Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the flip-it. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. Information on this can also be found in the explanatory video. We currently offer 8 different key profiles for the corresponding cylinders. Further types are being planned. This key profile is for WILKA-W3600. 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.6mm 

The different key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins.  Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the flip-it. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. Information on this can also be found in the explanatory video. This key profile is for D6X. 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.8mm 

Here we are looking at different "Dimple pin picks" required for setting the pins in the lock. We currently offer 5 different picks. These differ in the design and shape of the "flags". Depending on the requirements, the corresponding pick is used.  

Pick blade for the Original Jackknife-Pickset by Multipick Our exchangeable Jackknife pick blades are tuned by their thickness of only 0.5 mm even for picking narrow cylinder locks.Made from German Hightech spring steelBrilliant quality “Made in Germany“ by ©Multipick  

Bump Key CVL (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!