Bump Key AZBE round cylinder

Bump Key ABUS A-key (piece)A-Keys are distinguished by a special cut and are used if the usual bump keys do not work on that particular cylinder type.You handle them with a variable combination of blows and rotations.You will only succeed in this technique with the necessary training.We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Bump Key DOCO (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!   

Bump Key Bump Key AVOCET (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!   

Dimple pin key AZBE (bump key) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Manual TOPOLINO Decoder for GERDA H plus This Topolino Decoder is constructed with a specific structure for the GERDA H plus cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Akarsan 3x3 pins, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Akarsan 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 12.70 mmShank length (outer): 16.70 mmWidth: 4.0 mmWidth of the shank: 3.05 mmWidth of the shank tips: 2.3 mmThickness: 1.3 mmTotal length: 76.20 mmWeight: 3.0 g