Bump Key CHUBB

Bump Key CHAVO (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Bump Key CES A-key (piece) A-Keys are distinguished by a special cut and are used if the usual bump keys do not work on that particular cylinder type.You handle them with a variable combination of blows and rotations.You will only succeed in this technique with the necessary training.We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Handle levers are important tools in cases of mechanical defects of the lock. Unfortunately this type of problem is very common and presents a great challenge to locksmiths. With the help of the door handle lever the latch can be activated by pushing down the handle on the other side of the door, thus opening the door. This unique tool, therefore, is a very simple solution to a difficult problem. Once the lock has been snapped out, the lever tool is inserted through the mortise lock as shown in the below diagram. The precisely calculated radius of the lever arm ensures easy insertion through the mortise lock. There it is thrown over the inside lever handle. After that, this can easily be actuated from the outside over the handle and the door can be opened quickly.  

Bump Key - Set 2 UK - 13 pieces We exclusively produce high quality, long life polished bump keys made out of steel! We do not fear comparison with bump keys from any other manufacturer!   

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.8mm 

Bump Key CVL 2 (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Bump Key BUVA (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!