Bump Key ERA 1

 

Bump Key ENFIELD (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

 

Especially designed for Multipick by Lock Noob to suit the special characteristics of a dimple lock. Also supports cylinders from North American manufacturers.This dimple lock tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. Dimensions:Shank width: 4.0 mmThickness: 1.5 mm A product of Multipick "Made in Germany - Made in Bonn". 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock SIMEKO 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case SIMEKO 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

A quint aggressive cycloid rake pick, suitable to rake several pins at the same time.This wave lock pick represents years of research and development. Based on various wave rakes which are commercially available, and in combination with initial mathematical modelling and final analysis on several prototypes, we created these impeccably crafted wave rakes. Welcome to the professional leagueThe ultimate lock-picks in worldwide unrivalled high-tech qualityFinest blades – high-quality spring steel - impeccable workmanshipFirst-class individual design - perfection in every detail100% Made in Germany –  from Multipick of course  We invite you to test it and see for yourself!Specifications:Pick type: RakeThickness: 0.6mmLength: 120mmWeight: 8gr.Blade material: High-quality spring steelHand grip material: High-quality stainless steel Our ELITE picks are rust-free thanks to a special hardening and tempering process.Caution! The aggressive cycloid wave rakes are sharp like a saw and can damage the pins and the entire lock.