Bump Key FCV

Bump Key HÄFELE 2 - 4-pins (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Bump Key HÄFELE 1 - 5-pins (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

NEW! Original Flexihammer from Multipick As from now on, finally, you can even hit over the door knob due to the redesign of the impact head!Often it makes sense to use the hammer from above the door knob to perform the bumping comfortably and according to the situation – this new hammer makes it possible, finally, and it is as light as its “small brother”.Special features:lightstronghighly flexibly springygood handlingextremely resistant  

Bump Key (piece) CES short We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!   

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock MCM 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case MCM 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

The door lever is an easy to use tool for lifting up doors. Very suited when using the latch opener set for double-offset doors and in many other situations. 

Handle levers are important tools in cases of mechanical defects of the lock. Unfortunately this type of problem is very common and presents a great challenge to locksmiths. With the help of the door handle lever the latch can be activated by pushing down the handle on the other side of the door, thus opening the door. This unique tool, therefore, is a very simple solution to a difficult problem.