Double-bit decoder for CR 6

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock CR 6/6, its construction is accordingly. The pick consists of a rod with 6x6 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case CR 6/6 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever Dekaba Mauer 4x4, its construction is accordingly. The pick consists of a rod with 4x4 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this caseDekaba Mauer 4x4 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

The new MOTTURA Antideco automatic opener sets new standards in the opening technology of double-bit locks with various anti-pick- and anti-decoding mechanisms and opens the following locks: Mottura Antideco 1 & Mottura Antideco 2The straightforward and secure operation ensures that unlocking is practically a piece of cake.After opening, a working key can be created.It only needs a little bit of practice and know-how to be able to use it successfullyPlease make sure to refer to the operating manual or the instructions video before use!We ensure 1 year warranty when used properlyExpress maintenance and repair in case of damage Additional video tutorials are available on YouTube! 

The new, improved Quick-Key Easy Pro Set from MultipickThe most precise and fastest key copy system in the world - now even more compact, lighter and cheaper.We have succeeded in significantly improving some of the key features of the Quick-Key Easy. We have fulfilled your wishes by making the set lighter and more compact. It is even easier to store and the new packaging of the impression-making material make it even faster to use. New precision mouldNew practical packaging for the casting compoundEasier to handleReduced priceThanks to the new and handy plastic casting mould from MULTIPICK. Together with the exact measured quantity of the required moulding compound, it is now possible to mould all types of keys and produce duplicate keys in a matter of no time. Post-processing is unnecessary.The great advantage of the new system is the permanent and quick readiness for deployment and the possibility to transport the duplicated key safely and securely for a later key production and to keep it stored for a long time.The Quick-Key Easy Pro comes complete with all the required accessories* to produce at least 5 keys. All components can also be ordered individually.It’s an absolutely ingenious tool that you can start using immediately.Dimensions: 180 x 145 x 45 mm*Due to shipping regulations, the sets are delivered without lighter fluid, but this is widely commercially available. 

Manual TOPOLINO Decoder for STS 5 pins

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Elbor / Class 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Elbor / Class 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Bump Key CES A-key (piece) A-Keys are distinguished by a special cut and are used if the usual bump keys do not work on that particular cylinder type.You handle them with a variable combination of blows and rotations.You will only succeed in this technique with the necessary training.We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!