Double-bit decoder for IDM 3x3

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock FAC Safe Lock, its construction is accordingly. The pick consists of a rod with 4 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case FAC Safe Lock or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Mottura 6 Nucleo Compact Automatic Double-bit Lock Opener Special EditionThe new MOTTURA 6 NUCLEO automatic opener sets new standards in the opening technology of double-bit locks and opens the following:MOTTURA 6 Nucleo CompactThe straightforward and secure operation ensures that unlocking is practically a piece of cakeAfter opening, a working key can be createdIt only needs a little bit of practice and know-how to be able to use it successfullyPlease make sure to refer to the operating manual or the instructions video before use!We ensure 1 year warranty when used properlyExpress maintenance and repair in case of damageAdditional video tutorials are available on YouTube! 

Open tilted windows quickly and easily, even with half-closed shutters. The Kipp-Blitz Tilt Window Opener Basic Set is characterised by the fact that the actuating cord no longer has to be painstakingly guided to the other end of the window handle. This enables the window to be opened more quickly and efficiently. Unlike other tools, this tool does not need to be secured to the window handle with an additional latching mechanism or a second cord. You can open the window effortlessly with just one action, making it easier to access vital areas. Another major advantage is the increased security offered by the tilt window opener. The faster opening process significantly reduces the time spent by firefighters on the fire service ladders. The faster opening process significantly reduces the time spent by rescue personnel on fire brigade ladders. This minimises potential risks and thus creates a safer environment for the rescue services. In addition to improved functionality and safety, the tilt window opener is also characterised by its simplicity of use and handling. Thanks to its user-friendly design, it is easy to operate and does not require time-consuming training sessions. This saves valuable time and ensures effective working.Quality is our top priority, which is why we only use stainless steel and spring steel to manufacture our tools. The cord is made of high-quality, wear-resistant Dyneema with a tensile strength of 410 kilograms. (Made in Germany)Please note that the professional and basic set does NOT include the adapter for U-shaped handles and the bolt set for push-button secured handles. However, you can purchase these seperately and upgrade at any time with Art. No. 33986 (upgrade kit for tilt window opener Kipp-Blitz). 

Welcome to professional high classThe ultimate Lock-Pick Set in worldwide unrivaled High-Tech qualityFinest blades – ingenious spring steel – perfect finishingHigh quality individual design - Perfection in every detail100% Made in Germany – By Multipick, of courseWe invite you to test it! Give it a try!Dimensions: 60 x 140 x 14 mmOur ELITE picks are rust-free thanks to a special hardening and tempering process. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Cisa/Gevy 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Cisa/Gevy 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Mottura- Project 6 Pin ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Mottura- Project 6 Pin cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Mottura- Project 6 Pin, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

Manual TOPOLINO Decoder for DIERRE NEOS This Topolino Decoder is constructed with a specific structure for the DIERRE NEOS cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected.