Double-bit decoder for Mottura /Kale 4x4

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Mottura Nucleo Compact 7, its construction is accordingly. The pick consists of a rod with 7 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Mottura Nucleo Compact 7 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock MCM 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case MCM 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Metem 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Metem 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

This unique pick profile “Monith” which "Lock Noob" exclusively developed for Multipick, is an adaption of our Snake1(PN13) rake but with a tip of a Bogota rake. This sophisticated lock pick is suitable for locks with more extreme bittings and also makes it easy to reach the rear pins. With a little practice and some rocking and raking, a lock can be opened in a short time. We offer you:The ultimate lock-picks in worldwide unrivalled high-tech qualityFinest blades – high-quality spring steel - impeccable workmanshipFirst-class individual design - perfection in every detail100% Made in Germany –  from Multipick of course Specifications:Pick type: RakeThickness: 0.6mmLength: 120mmWeight: 8gr.Blade material: High-quality spring steelHand grip material: High-quality stainless steel 

This tool was developed for opening and decoding vehicle locks in a one-step operation.Developed for vehicle locks mentioned below, this tool features a special profile that enables targeted picking of each individual disc of the cylinder. Once successfully opened, the code can be read from the scale on the tool and a key can be produced. One tool, three functions: Tensioning, picking and decoding.Suitable for: Citroen Jumpy, Nissan Interstar, Primstar, Peugot 106, 206, 306 

Manual TOPOLINO Decoder for DIERRE NEOS This Topolino Decoder is constructed with a specific structure for the DIERRE NEOS cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

The new JUWEL 4+4 V2 automatic opener sets new standards in the opening technology of double-bit locks and opens the following: JUWEL 4+4 V2The straightforward and secure operation ensures that unlocking is practically a piece of cakeAfter opening, a working key can be createdIt only needs a little bit of practice and know-how to be able to use it successfullyPlease make sure to refer to the operating manual or the instructions video before use!We ensure 1 year warranty when used properlyExpress maintenance and repair in case of damageAdditional video tutorials are available on YouTube!