Dyneema special cord for tilt window opener Kipp-Blitz

Upgrade kit compatible for the Kipp-Blitz window opener for professional deployment on site.Contents:• Adapter for U-shaped handles• Bolt set for push-button secured handlesTilt window opener not included in the set 

Now you can also order the "Genius Repair Kit" through us, consisting of 2 sturdy nylon ribbon cables and 5 repair press clamps that can be used to repair your “Genius” with just a few taps from a hammer.  

With this revolutionary tool, plastic windows that are shut can be opened from outside without destroying it. First, by means of a latch opening card or an opening needle, the position of the roller pin or mushroom head lock is determined. Next, the pivot puller is inserted into the rebate, then pushed upwards and "tilted" backwards to grip the pivot / mushroom head lock. With this revolutionary tool, plastic windows that are shut can be opened from outside without destroying it. The first step is to locate the position of the pivot or mushroom head lock by means of a latch opening card or an opening needle. Next, the pivot puller is inserted into the rebate, then pushed upwards and "tilted" backwards to grip the pivot / mushroom head lock. Finally, the provided flat ribbon is inserted through the handle eyelet and "knocked" downwards with a round object, causing the window handle to move into the open position. Attention! Cannot be used with wooden windows, as these always consist of a double rebate. 

Open tilted windows quickly and easily, even with half-closed shutters. The Kipp-Blitz Tilt Window Opener Basic Set is characterised by the fact that the actuating cord no longer has to be painstakingly guided to the other end of the window handle. This enables the window to be opened more quickly and efficiently. Unlike other tools, this tool does not need to be secured to the window handle with an additional latching mechanism or a second cord. You can open the window effortlessly with just one action, making it easier to access vital areas. Another major advantage is the increased security offered by the tilt window opener. The faster opening process significantly reduces the time spent by firefighters on the fire service ladders. The faster opening process significantly reduces the time spent by rescue personnel on fire brigade ladders. This minimises potential risks and thus creates a safer environment for the rescue services. In addition to improved functionality and safety, the tilt window opener is also characterised by its simplicity of use and handling. Thanks to its user-friendly design, it is easy to operate and does not require time-consuming training sessions. This saves valuable time and ensures effective working.Quality is our top priority, which is why we only use stainless steel and spring steel to manufacture our tools. The cord is made of high-quality, wear-resistant Dyneema with a tensile strength of 410 kilograms. (Made in Germany)Please note that the professional and basic set does NOT include the adapter for U-shaped handles and the bolt set for push-button secured handles. However, you can purchase these seperately and upgrade at any time with Art. No. 33986 (upgrade kit for tilt window opener Kipp-Blitz). 

Bent lead rod allowing the insertion of the Genius in very tight gaps. 

The HOT SHOT Kit Prime-Cut has been revamped by BROCO.The manufacturer has added a spacious, higher quality carrying case that holds additional gear such as a regulator, clothing and everything else needed to get the job done. The welding gloves were also upgraded and the glasses were replaced with a protective mask. The central unit of the BROCO HOT SHOT kit Prime-Cut consists of the handle for the lances, which holds the burning rods with special collets and the integrated oxygen valve to regulate oxygen supply towards the end of the lances. The 3 meter long oxygen pipe, which is connected to the handle, is to be connected to a conventional oxygen pressure regulator. We screw the set together fitting to the European standards.(Pressure regulator and oxygen bottle are not included in the set)Functioning:The following articles and accessories are required to work with Hot-Shot thermic lances:Art-No 60300 - Hot-Shot KitBattery with min. 12 volt and 10 Ah. A battery for motorbikes with these characteristics is sufficient.Oxygen bottle (the size depends on the quantity of material you want to cut and existing means of transport /space.Pressure regulator for oxygenAppropriate quantity of thermic cutting rods for the planned application Connect the pressure regulator to the oxygen bottle and the end of the oxygen hose to the exit of the pressure reducer. The clamps of the strike plate and the handle of the tool are connected to the battery according to the colour code (red to +, blue to -). Select the appropriate cutting rod and collet depending on the object you want to cut. Unscrew the nut of the handle in order to place the collet then tighten the nut slightly. Now place the thermic rod in the collet (the hollow end of the rod must be placed in the collet/handle) and tighten the nut completely. Now open the valve of the oxygen bottle and adjust the level of oxygen pressure using the pressure reducer. Now touch the strike plate with the tip of the thermic rod in order to create short circuit sparks. Push the mechanism of the handle, in order to let the oxygen flow through the cutting rod and thus igniting the rod. It is possible to adjust the oxygen pressure again in order to start cutting. The higher the oxygen pressure /throughput, the higher the temperature at the tip of the rod. While higher temperature allows faster cutting it will also result in a faster burning of the thermic rod. In order to cut, place the tip of of the rod directly on the surface of the object you want to cut.  When selecting the thermic cutting rods to be used keep in mind that the diameter of the rod and the length of the rod, in combination with the oxygen pressure used, influence the speed of the cut. The oxygen pressure that is optimal depends on the material that is to be cut. The producer recommends the following approximate oxygen pressures for different types of metals: 0.6 - 1.4 bar for the punc  turing hard metal plates1.5 - 3.0 bar for the cutting of steel plates up to 0.7 mm thickness3.0 - 3.5 bar for the cutting of steel plates up to 15 mm thickness3.5 - 4.2 for the cutting of steel plates from 15 mm to 50 mm thickness4.2 - 5.5 for the cutting of steel plates over 50 mm thickness Unfortunately the producer does not give recommendations for the cutting of concrete, bullet proof glass or other materials. Users can quickly find out the optimal oxygen pressure through some short testing, though. 

Open tilted windows quickly and easily, even with half-closed shutters. The Kipp-Blitz Tilt Window Opener premium set is characterised by the fact that the actuating cord no longer has to be painstakingly guided to the other end of the window handle. This enables the window to be opened more quickly and efficiently. Unlike other tools, this tool does not need to be secured to the window handle with an additional latching mechanism or a second cord. You can open the window effortlessly with just one action, making it easier to access vital areas. Another major advantage is the increased security offered by the tilt window opener. The faster opening process significantly reduces the time spent by firefighters on the fire service ladders. The faster opening process significantly reduces the time spent by rescue personnel on fire brigade ladders. This minimises potential risks and thus creates a safer environment for the rescue services. In addition to improved functionality and safety, the tilt window opener is also characterised by its simplicity of use and handling. Thanks to its user-friendly design, it is easy to operate and does not require time-consuming training sessions. This saves valuable time and ensures effective working.Quality is our top priority, which is why we only use stainless steel and spring steel to manufacture our tools. The cord is made of high-quality, wear-resistant Dyneema with a tensile strength of 410 kilograms. (Made in Germany).