ELITE G-PRO replacement pick tip-11 (L00)

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.50mmFlag width: 1.30mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.60mmFlag width: 1.40 - 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 2.00mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.50mmFlag width: 1.30mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 1.60mmFlag width: 1.40 - 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 2.00mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mm 

Why buy a complete new dimple lock pick? For quick pick tip changes, loosen the Allen screw at the head of the ergonomically shaped handle using the Allen key (0.9 mm), remove the faulty or broken pick tip and swap with one of the replacement pick tips. Attention! As we always keep in touch with our community, it has been brought to our notice that the very fine grub screw, which is only meant to prevent the flag from sliding out, can easily become loose if overtightened. To prevent this, we will be using a larger and more solid M2.5 grub screw in future, in order to eliminate this problem. The fixation point built into the shaft holds the pick tip absolutely tight in the right position. It doesn't get simpler than that. Specifications:Flag length: 2.00mmFlag width: 1.60mmFlag outreach: 0.00mmFlag orientation: rightShank radius - Ø: 0.85mm