Hand tools fire department

Otoscopes allow users to view and inspect narrow and restricted spaces, normally difficult or impossible to reach. The tool illuminates the area that is to be inspected brightly and magnifies it at the same time. Professionals in the Locksmith trade can, for example, inspect the interior parts of locks and cylinders in order to identify damages, blocking objects, etc. Pen-Otoskop 1A small, state-of-the-art otoscope with plastic body, colour: black, very bright halogen illumination 2.5 volts. Our recommendation! The small size of the tool allows carrying it in a pocket. Otoscope:Fibre-OpticsMagnifies x 2.5 Battery handle for 2 batteries type AAThe otoscope includes 2 cones each of diameters 2.5 and 4.0 mm ØDelivery in a modern hard-cover plastic case   Our range of otoscopes are high quality products made in Germany and carry a 2 year guarantee. Delivery will be in black colour and without batteries! 

For tight, difficult to access areas which can not be reached by pointed pliers,we recommend the chrome-plated nose pliers with 40° bent jaws, polished head andhandles with multi-component covers.  

Knipex Long Flat Pliers 

This newly developed screw-driving adapter fixes the pull-screw in its refined screw holder and, allows the fast, comfortable and one-handed screw-driving of the pull-screw into the lock cylinder. After the insertion of the pull-screw into the plug the adapter can be removed easily. A very useful additional tool! The exchangeable standardized bit makes the tool useful for any type of screws. For the use with automatic screw machines etc. 

This 4-piece drill and mill auxiliary key set is an aid for targeted and efficient destructive opening of profile cylinder locks. It enables precise cutting of the core pin row in the cylinder housing by drilling or milling. The set makes the opening process considerably easier, especially for cylinders that are secured with hard driver pins.The drill and mill auxiliary key is inserted into the keyway of the profile cylinder. This pushes the cylinder core pins into the cylinder housing. A drill or milling cutter is then used to drill directly below the cylinder core in order to cut through the row of pins. Depending on the cylinder, the drilling depth is roughly 2.5 cm so that all pins in the core can be cut through. Once the milling or drilling has been completed, the tool should be held in the keyway to prevent the pins from moving and to prevent the cylinder core from jamming again. Afterwards, turn the key stump in the opening direction with the aid of a pair of pliers so that the auxiliary drill key can act as a key and open the cylinder.The thin key blanks fit into most standard profiles and cover around 90 % of common cylinders.This set is particularly practical as it not only makes the milling or drilling process easier, but also allows the key blank to be used directly to open the cylinder after milling. It is an essential tool for professionals who regularly have to open cylinders, including those that are particularly resistant. 

Extra long socket wrench with DIN mounting for drill chuck and cordless screwdriver. This makes working with the Bell Puller a lot easier. 

Double Box Gear-Wrench 17 + 19 mm, adjustable clock- or counterclockwise rotation, suited for use with the Multipick-Service Bell or LockForce. Quality German product. 

This practical tool enables you to remove pins, springs and fragment residues from the milling or drilling passage. 

Fine, high quality spring steel with aluminium handle to push the cylinder coupling in and to carry on the cam if the picked plug is spinning. Suitable as well for manipulation as for destructive openings (drilling).   

The auxiliary key for milling corrects malfunctions after milling.  After milling there may some obstacles which the auxiliary key helps to eliminate: 1. On cylinders with emergency function: Maintain the locking engagement pushed inside with the auxiliary key in the middle of the cylinder while turning it. 2. Normal cylinders: Engagement slipped forwards by the vibrations during milling. Keep the cylinder hole vertical and move the engagement inside with the auxiliary key. This allows turning the locking nose.3. Key in the cylinder from inside: While turning with the auxiliary key, push a sharp 1mm spring steel wire at the border of the cylinder plug so that it takes along the locking nose. 

Suitable for all standard bits and combi thread drills.Suitable for all standard bits and combi thread drills. Suitable for all standard bits and combi thread drills. 

A constant companion of our VIPER pull screws.