L4V (Lock for Vans) Topolino Decoder

Manual TOPOLINO Decoder for GEVY This Topolino Decoder is constructed with a specific structure for the GEVY cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

Manual TOPOLINO Decoder for SIDESE (PUMP)This Topolino Decoder is constructed with a specific structure for the SIDESE (PUMP) cylinder lock and consists of a blade with five uniquely positioned decoder pins.By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key.Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected.  

Manual TOPOLINO Decoder for CISA ASIXP8

The great advantage of our special QA Pro 2 kit is that all the most important tools are immediately accessible and always by your side. You can turn our special screw into the cylinder core with the Wiha Torx TX-20 screwdriver, or, even easier, with a cordless screwdriver in combination with our SchraubFix bit adapter (both supplied in the set). It's the ultimate set for emergency services and professional locksmiths who always need to keep a cool head in tricky situations.The pulling device QA Pro 2 allows complete door opening in less than 20 seconds! This makes QA Pro 2 the perfect pulling tool for authorities and rescue forces worldwide, since it guarantees a safe, fault-tolerant and simple handling.Functioning:QA Pro 2 is hooked on the VIPER special pull screw which is screwed into the cylinder core. Just a slight lever movement is necessary to break the cylinder. The QA Pro 2 protection jaws avoid scratches on the door surface as well as on the fitting.All sizes of our special pull screws can be used with QA Pro 2. The QA Pro 2 is a quality tool from Germany, which has been constructed for a lifetime application in the professional environment. Since the tool works almost maintenance and wear-free, it is predestined for applications with authorities and rescue forces.Dimensions:Length (max. stretched): 455 mmLength (max. angled): 385 mmTube height: 30 mmTube width: 20 mmClamping height: 40 mmClamping width: 20 mmWeight: approx. 2.2 kgCase dimension: 395 x 310 x 105 mm 

This starter kit is an invaluable asset for people who are just entering the locksmith industry, and who need to gather experience with locking cylinders. It's equipped with all the necessary tools, supporting you from your very first attempts to pin cylinders. The set comes in a durable plastic case made from durable polyethylene. 

Manual TOPOLINO Decoder for MCM E8 / AS6 This Topolino Decoder is constructed with a specific structure for the MCM E8 / AS6 cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

The ELITE G-PRO are the ultimate dimple lock picks, designed  for the professional lock picker.The highest-quality manufacturing and the finest materials allow unprecedented feedback when picking.The ELITE G-PRO is distinguished by its outstanding quality:finest polished tips in many variations for the widest variety of locksmaximum feedback - maximum transfer of pin behaviour to the userextremely stable, yet light and easy to handle, just like a springmicroelliptic blade shanks in various diameters for the perfect turning pointnon-slip, fatigue-free and lightweight handles made of the finest rubberized aluminiumexchangeable and individually available tips to safeguard the investment100% made in Germany.Specifications:Flag length: 1.60mmFlag width: 1.40 - 1.60mmFlag outreach: 0.00mmFlag orientation: leftShank radius - Ø: 0.85mmShank length: 95.0mmShank diameter: 8.0mmTotal length: 130.0mmWeight: 11g