MCM SCX Plus Topolino Decoder

The Multipick ELITE Ultradecoder is designed to decipher the combination of multi wheeled locks. By placing the Ultradecoder on the axle that runs through the wheels inside the lock the operator can feel for changes in the features of the axle. Flat spots or grooves on the axle can be felt by the Ultradecoder as the operator spins the wheels. These flat spots or grooves will reveal the locks combination. By using the decoder on the axle beside each wheel the operator can line up all the flat spots or grooves to the same position. When this is done the combination will be set. The final step is to move combination into the correct position. Simply roll each wheel down one position and test the lock to open. Repeat this process until it does open.The Ultradecoder is made from thin high test steel with a solid steel handle.This decoder can also be used to depress the locking bar inside the Master 175 and other similar models quickly opening the lock. 

Manual TOPOLINO Decoder for STS 6 pins This Topolino Decoder is constructed with a specific structure for the STS 6 pins</strong cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

Manual TOPOLINO Decoder for MEGA 6

Manual TOPOLINO Decoder for MULTILOCK 7x7 This Topolino Decoder is constructed with a specific structure for the MULTILOCK 7x7 cylinder lock.By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key.Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected.  

TCS-B ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the TCS-B cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the TCS-B, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

This special tool developed for locksmiths and government agencies allows the easy and hassle-free removal of all types of cylinder locks (profile, round and oval cylinders). The ‘’Bell‘’ enables the door to be opened quickly without damaging the door or the fitting.In combination with the included core pulling plates, the cylinder core alone can be easily extracted from the housing so that the locking mechanism can be actuated without any difficulty. Especially with half cylinders, such as those found on glass doors, garage doors, alarm systems, shutters etc., to save time, deploying the "Bell" is often the only option when it comes to opening the door in an emergency. As the device works with a single and centrally oriented pulling-mechanism, there are no lateral forces during the actual pulling. This prevents the special extraction screws from jamming or snapping.For its compact and robust design and the effective mode of operation, the "Bell" is considered one of the best plug-pulling devices among professionals around the world.The “Bell Select Set” offers you a complete package that allows you to get straight to the job without having to purchase individual tools.The "Bell" is made of hardened steel to ensure years of use. The tension rod is equipped with a hardened trapezoidal thread that enables precise operation and improved load bearing. Compared to the conventional fine thread, this new thread is more durable and allows faster and more precise operation without losing any torque due to the greater thread pitch. Furthermore, the rougher trapezoidal thread is less susceptible to brass shavings.If you should ever need spare parts, just give us a call! We constantly have all spare parts in stock.As accessories, we recommend the Makita Cordless Drill Driver DDF485 (SKU: DDF485+).Drill Bits that have proven to be particularly stable are our Cobalt Drill Bits - Heavy Duty Splitpoint DIN 338 (SKU: 552001).Care instructions for Multipick Bell (Please pay attention to these instructions!) Just like any other tool, our lock puller "Multipick Bell" also requires care. This means that the ball bearing and the tension rod as well as all moving parts should be kept free of metal shavings after each use and regularly treated with lubricating grease. You can either apply it by means of a brush or, alternatively, using a similar spray grease. 

Scope of delivery:1x Topolino decoder for HERACLES Y7 & Y7+