TECON TC6 Topolino

Manual TOPOLINO Decoder for MCM S This Topolino Decoder is constructed with a specific structure for the MCM S cylinder lock and consists of a blade with six uniquely positioned decoder pins. By deploying the TOPOLINO Decoder, you decode the profile of the key in just a few steps and can thus open the cylinder lock in the same easy way as with the original key. Please make sure to use it in a professional way, otherwise the opening ability of the cylinder and / or the tool may be affected. 

Dimple pin bump key for ABUS EC750/ EC850/ D10/ D6/ Dx6/ D6X We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Dimple pin key - MAUER DEKABA 6 (bump key)  We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Pick blade for the Original Jackknife-Pickset by MultipickFor perfect supplementing the Jackknife pick sets Exclusive Edition by Multipick we provide 17 different possibilities to personalize your Jackknife pick set according to your wishes and imagination. Often requirements to a tool are very special. So it’s brilliant to have the possibility to assemble a “personalized” tool. The German heavy-duty steel which we use is a highly hardened and tempered metal alloy, unique on the world market. To our knowledge there is no other producer - a part of Multipick -, who uses such a high quality material for pick manufacturing. We are not going to divulge any details, but we are sure that you won’t find the same elsewhere. By precise production in our manufactory changing the blades is “a piece of cake“. The single blade modules made from German high-end steel can be integrated into your Jackknife pick set in a breath. Simply loosen the Allen screw and change the respective blade module. Thus you are optimally prepared for all picking mission, howsoever tricky. Multipick is essentially committed to production of German high-end tools. We disapprove of cheap tools with minor to bad quality, partially produced in low wage countries under inhumane conditions. Multipick clearly speaks up for German high-class workmanship. Therefor our products are elaborately manufactured according to German quality standards. We only guarantee for extraordinarily high material and manufacturing quality on Multipick labelled products! High-end material with perfectly functioning even after many missions - We do not sell steel scrap squeezed into shape, since we develop for the future. Made in Germany - Made in Bonn.  

Bump Key (piece) ABUS - depth 8 right We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!   

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Akarsan 3x3 pins, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Akarsan 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever Nucleo Compact 6, its construction is accordingly. The pick consists of a rod with 6 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Nucleo Compact 6 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool.