30/30 Emergency and Practice / Exercise Lock - 10 pcs

The ELITE HILO Grips combine high-performance functionality with a sleek and ergonomic design.Made from high-durability plastic, these grips offer exceptional stability and long-lasting performance. The integrated Secure Touch Zone ensures a firm and comfortable grip, preventing slips and enhancing control even during extended picking sessions.Featuring six internal magnets, the ELITE HILO Grip securely holds your lock pick in place without screws or traditional plug-in methods. This enables quick and effortless pick swaps in just seconds.Designed to fit all Multipick Elite picks (0.4 / 0.5 / 0.6 mm), this set of 3 grips enhances handling without sacrificing sensitivity.HILO stands for High Sensitivity and Low Interference, a concept engineered for maximum feedback accuracy. The grip remains stable and ready for immediate use, even when switching picks.Technical Specifications:Length: 89 mmWidth: 11 mmHeight: 6,8 mmHeight including Single Pick: 7 mmMaterial: High-durability plasticColor: BlackCompatible with: All Multipick Elite picks (0.4 / 0.5 / 0.6 mm) 

The single dimple pick Flat Flag was developed exclusively for Multipick in collaboration with the well-known lockpicker Lock Noob. The tool is based on a unidirectional flat flag profile – one of the most versatile designs for manipulating dimple locks.The key feature lies in its alignment: the flag is perfectly in line with the shaft, resulting in an especially slim profile – ideal for tight tolerances and complex dimple locks.This geometry allows pins to be manipulated from both sides without losing torque control. This is a decisive advantage, particularly with high-security dimple locks that have multiple pin rows – such as top/bottom or side-by-side arrangements.Thanks to its dual-sided usability, the Flat Flag is suitable for left or right-hand operation, reducing the constant need to switch between different picks.The zero position remains visible at all times, making it easier to locate the next pin position. The specially surface-treated handles are also more scratch-resistant and durable. This handle design was developed in close cooperation with Lock Noob, with a clear focus on functionality and real-world usability.High versatility, precise control even in narrow keyways, and optimal handling in complex locking systems – these are the strengths of this pick. Specifications:Flag length: 2.0 mmFlag width: 2.5 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmTotal length: 130 mmWeight: 11 g 

New cutting-edge design, new top features - unique! – The Centurion from MultipickNow also suitable for the North American market!The Centurion is a new, enhanced product from the ©Multipick brand and is manufactured with the latest CNC milling machines using high-quality aircraft aluminum. The Centurion is "the" next generation high-tech cylinder holder. The brilliant design combined with a high-quality surface makes the Centurion always look outstanding. The elegant and massive base of the solid milled foot provides a secure and firm footing. The small rubber studs on the base of the Centurion secures it against slipping on virtually all surfaces during picking. However, in the event of extreme “pick attacks”, the supplied table clamp can prevent the Centurion from slipping. The newly milled cylinder mount is milled perfectly to fit all Euro profile cylinders and demonstrates only minimal play. In addition, the cylinder is secured on the top by a knurled screw which completely eliminates slipping and allows you to concentrate fully on the cylinder and its opening.North American users can now also benefit from the additional mounting capability of the cylinder.Further, if you’re looking for a high-quality practice cylinder, we recommend the model sets TCS-SET and TCSS-SET respectively. The sets are manufactured by ©Multipick and are the perfect complement to the Centurion.You are welcome to let us engrave your centurion individually. Image, drawing or even names can be engraved. ©Multipick works with the most modern laser technics and can place all kinds of subject under the laser.You are welcome to contact us for more information. Colour: Aluminium (EN: AW-7075)The centurion is delivered in parts. A fitting Allen Key of 3 mm is included. Dimensions: Height: 215 mmLength of the pillar: 185 mmDiameter of the pillar: 37 mmBase (triangle): 145 x 145 x 145 mmWeight: 0.924 kg Fine precision engineering "Made in Germany" by ©Multipick  

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

The popular panic door opener is now available for doors opening to the left and to the right. The easiest direction for opening is to go from the top towards the bottom of the door. Now this is possible with both right and left hand doors. No more complicated handling thanks to the two different directions in which you can now select from, left or right, depending on the direction the door is opening to.Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities!The tool is made from 1 mm spring steel. 33800 = Door use from the top right33805 = Door use from the top left