ARES Disc Detainer Opener Upgrade Kit – Dom Diamant

Expand your existing ARES System with the ARES Upgrade Kit – Abloy Profile, enabling the opening of Abloy Profile disc detainer cylinders.Abloy Profile cylinders—particularly the widely used "C" variant—are commonly found throughout Northern Europe, especially in Sweden and Finland. They are regarded as technically demanding and require a high level of precision, tension control, and disc manipulation.For this reason, the ARES Upgrade Kit has been specifically designed to match the geometry of this cylinder profile. It enables controlled manipulation and provides precise feedback throughout the opening process. Please note that certain less common high-security Abloy Profile cylinders may use different keyway designs that are not compatible with this upgrade kit.Further information:Operating instructions, including the scale chart for cylinder profilesOverview of all ARES components 

Expand your existing ARES System with the ARES Upgrade Kit – Anchor Las, specifically designed for working with Anchor Las disc detainer locks. The upgrade kit integrates seamlessly into your existing ARES System and extends its range of applications.Anchor Las systems are characterised by their uniform design. All cylinder variants share the same construction, making them fully compatible with one another. The upgrade kit has been precisely engineered to match the geometry of this lock design, enabling controlled manipulation with clear and precise feedback. An ideal addition for greater flexibility in professional applications.Further information:Operating instructions, including the scale chart for cylinder profilesOverview of all ARES components 

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money.The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool.With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly.Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version.Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort. 

The “Long Thin Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, particularly slim Flat Flag profile and offers the full reach of the original Long Flat Flags, while providing a finer working surface for more precise positioning.Its key feature is the slim geometry: the flag is designed to be long while remaining deliberately thin. This allows the pick to be guided more precisely between closely spaced pins and positioned cleanly in locking systems where space is limited. This is particularly useful for dimple locks with closely spaced pins or opposing pin rows. In such situations, the pick needs to find its way through the lock without constantly catching on neighbouring pins.With the flag aligned with the shaft, the profile remains slim and direct. This provides good guidance in the keyway and clear feedback while working. The thinner design really comes into its own when the pick needs to be guided between opposing pin stacks.The Long Thin Flat Flag is particularly well suited to high-security dimple locks. When pins are positioned very close together or the lock geometry requires precise positioning between components, this profile provides greater control and reduces unnecessary contact inside the lock. Thanks to its reversible design, the pick can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Specifications:Flag length: 3.0 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 11 g 

The “Half Diamond Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a finely tapered Half Diamond geometry, a shape that really comes into its own when pins need to be set precisely with minimal contact area.Its key feature is the combination of reach and precision: the flag has the same working length as the Long Flat Flags but tapers significantly towards the tip. This allows the pick to be guided precisely towards individual pins without creating unnecessary contact inside the lock. This is particularly advantageous for high-security dimple locks with tight tolerances, multiple pin rows, or very sensitive feedback.With the flag aligned with the shaft, the profile remains slim and direct. The pick can be guided smoothly, provides clear feedback, and helps you position individual pins precisely. Thanks to its reversible design, it can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Its strengths lie in the fine Half Diamond tip, its long reach, and its precise handling when working with demanding locking systems.Specifications:Flag length: 3.0 mmFlag width: 2.0 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 11 g