Bump Key CHAVO

Bump Key FAB (piece) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Ezcurra 5x5, its construction is accordingly. The pick consists of a rod with 5x5 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Ezcurra 5x5 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Bump Key FTH 1-piece We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Dimple pin key - EZCURRA 6-pin (bump key) We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer! 

Specially manufactured by ourselves to tackle the unusual properties of dimple pin tumbler locks. Also works with dimple pin cylinders made in the USA. Each individual dimple pin tensioner is made of high-quality spring steel and thus generates highly sensitive feedback. Dimensions:Conical width: 4 – 3.6 mm + 4.0 mmThickness: 1.2 mm A product of Multipick "Made in Germany". 

The different key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins. Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the flip-it. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. Information on this can also be found in the explanatory video. We currently offer 8 different key profiles for the corresponding cylinders. Further types are being planned. This key profile is for WILKA-W3600. 

Bump Key (piece) CES short We exclusively produce high quality, long life polished bump keys made out of steel!We do not fear comparison with bump keys from any other manufacturer!