Door Latch Slider - TFG Set 2 pieces. (30 + 35 mm)

The (in our opinion) perfect Door Latch Slider The latch opening slider “TFG” completes our selection of tools for the opening of closed but unlocked doors . We are absolutely enthusiastic about the tool’s effectiveness and quality and use the "TFG" on an almost daily basis ourselves. The "TFG" comes in 5 different sizes: 15, 20, 25, 30 & 35 mm, each size optimized for the different types of offset door designs. Experience tells us that there is no better tool for the simple opening of closed but unlocked doors. Put this to the test yourself! The use is incredibly easy! Insert the "TFG" in the gap between door and frame, slide it down to the latch and the door opens.It is made out of highly flexible spring steel and is only as thick as 0.8 mm. The "TFG" can be used effectively almost everywhere. The "TFG" has no sharp edges, and does not cause scratches or other damages on the door or the frame. If the sliding of the "TFG" is made difficult by the sealing strip, lubrication of the "TFG" is very effective.The door latch slider “TFG” is highly flexible but still strong and almost indestructible. Only 0.8 mm thick! Without sharp edges. 

Opening set for single and double rebated doors  Every locksmith is familiar with the problem of a double rebated door that has fallen shut. These spiral openers made of high-quality spring steel can be used in many cases to open double rebate doors without causing damage. The usage is very simple: The tool is screwed in through the narrow gap between door and frame until it hits the latch. Then the lock latch is pushed back by turning it further. Apart from a punctured rubber seal, there is usually no damage to the door and frame. The set consists of 2 tools with different material thicknesses (1.5 and 1.7 mm) and spiral leads for different door frames. Of course, the tools are also perfectly suitable for opening single rebated doors! 

Every locksmith is familiar with the problem of a double rebated door that has fallen shut. These spiral openers made of high-quality spring steel can be used in many cases to open double rebate doors without causing damage. The usage is very simple: The tool is screwed in through the narrow gap between door and frame until it hits the latch. Then the lock latch is pushed back by turning it further. Apart from a punctured rubber seal, there is usually no damage to the door and frame. The set consists of 2 tools in 2 different material thicknesses (1.25 and 1.5 mm) as well as different spiral leads for different door frames. Of course, the tools are also perfectly suitable for opening single rebated doors! 

3108 - Wave (Spiral) Extractor 1.0 mm 

Hard Metal Drills with Carbide - Cone PointApplicable for all standard-uses in the locksmith field. The prizes refer respectively to a piece.Shank Diameter: 5,5 x 85 mm  

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!!