Double-bit decoder for Arfe safe 3x3

Mottura 6 Nucleo Compact Automatic Double-bit Lock Opener Special EditionThe new MOTTURA 6 NUCLEO automatic opener sets new standards in the opening technology of double-bit locks and opens the following:MOTTURA 6 Nucleo CompactThe straightforward and secure operation ensures that unlocking is practically a piece of cakeAfter opening, a working key can be createdIt only needs a little bit of practice and know-how to be able to use it successfullyPlease make sure to refer to the operating manual or the instructions video before use!We ensure 1 year warranty when used properlyExpress maintenance and repair in case of damageAdditional video tutorials are available on YouTube! 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock FAC Safe Lock, its construction is accordingly. The pick consists of a rod with 4 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case FAC Safe Lock or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

Important: This tool does not open locks with anti-pick system! Since this decoder is designed for double-bit lever lock Cisa/Gevy 3x3, its construction is accordingly. The pick consists of a rod with 3x3 pins. These pins are arranged in a specific order to match the intended lock. The pins are tightened in the back part of the handle by a pin manipulator. When this is tight, the pins will be difficult to move. If it is loose, the pins can be moved more easily. Preparation You take one of the two springs and put it into the slot in the front of the handle. Afterwards remove the cover of the housing (which is on the back). Then insert the rod into the handle as demonstrated in the video, and securely tighten it to the handle with the Allen key and insert the pin manipulator by screwing it into the back of the handle. The ease of movement of the pins is the most important thing. If they are tight, the opening process will not be successful! Lastly, mount the small tensioning handles. Now the decoder is ready for use. Opening and repairing procedure with the double-bit lock decoder Make sure that the decoder is used for the appropriate lock. Insert the tool with the pins that correspond to the position of the levers inside the lock. Now start the opening procedure. By tensioning it over the tensioning handles several times, the decoder raises each tumbler to a certain height so that the bolt can move. Finally, the pins "adopt" the position corresponding to the position of the "ridges" of the original key. Moreover, the double-bit lock decoder is easy to assemble and disassemble. Another important aspect is the ease of repairing a broken or twisted pin - simply unscrew the pin manipulator and replace the damaged pin. This lockpick tool works in a non-destructive way. Each tool can be used for a specific lock - in this case Cisa/Gevy 3x3 or for locks with similar dimensions. The internal dimensions of the locks (the size of the original key) are crucial. This means that you have to know the number of levers and the distance between the levers before using a lockpick tool. 

The new SECUREMME 3+3 automatic opener sets new standards in the opening technology of double-bit locks and opens the following: ALL Securemme 3+3 door locks with 2 and 4 turn pins (cam) and some safe lock models, common and SECURMAP ANTI-PICK modelsSecuremme 2, 4 and SAFE lock SECURMAP 11 modelsAkarsan 3×3 - locks with 2 turn pins (cam) - needs to be verifiedAcarsan 3×3 - locks with 4 turn pins (cam) - needs to be verifiedSteel 3×3 - with 2 turn pins (cam) - needs to be verifiedThe straightforward and secure operation ensures that unlocking is practically a piece of cake.After opening, a working key can be created.It only needs a little bit of practice and know-how to be able to use it successfullyPlease make sure to refer to the operating manual or the instructions video before use!We ensure 1 year warranty when used properlyExpress maintenance and repair in case of damage Additional video tutorials are available on YouTube! 

This professional tool is very popular to locksmiths, alarm system fitters and joiners. For anyone who regularly fits mortice locks it will prove invaluable - an accurate, speedy and professional tool that will save time and money. The tool allows the finishing of a mortice in a few minutes without removing the door.Offset doors: DBB Morticer can also be used on offset doors. The housing has slits allowing it to move the right and to the left, giving it the possibility to work on offset and double offset doors. It also cuts for hinges and striking plates on door frames of 95 mm thickness maximum.You may easily produce mortices for hinges and striking plates on door frames. (maximumof 95mm thickness).Carbide Tipped Mortice Cutters for wood: Compared to the previous design, these improved carbide-tipped mortice cutters increase the cutting speed by up to 50% and keep their sharpness longer. The simplified screw-on ‘anti-lock’ design enables the cutter to be released quickly using the spanner provided. All in all there are twelve cutters available.Aluminium doors: Separately we offer 4 different sizes of aluminium cutters, allowing work on aluminium doors without any problem.Always wear gloves and safety glasses when working on metal!Plunging Cutters: These new cutters are ideal for installers who need perfectly drilled true holes. Ideal for the quick installation of Tubular Latches, Deadbolts, Concealed Door Closers etc. The range of 4 sizes of ‘Plunging Cutters’ are designed for locks where perfect installation is an issue. Made from High Speed Steel, these very effective 3 point plunging drills are a real bonus for those wanting to solve installation problems.Small Bore Kit: This system has been developed especially for small mortices. The smaller cutters require a thinner shaft and a special housing kit.Long Drill System: The long Drill Kit has been specifically designed for the easy installation of electric lock cables through wooden doors - from lock to hinge.After cutting the mortice you convert the morticer into the long drill system. Special geometry helps to keep the cutter 'on line' with minimal effort. The Long Drill Kit is a leader in its field. It is quick, accurate and easy to use. Characteristics:Cuts mortice for lock and face plate.Fast and accurate on doors from 40 mm - 85 mm thick.Increased cutting speed of up to 50% thanks to carbide tipped cutters.Cuts mortices for hinges, some striking plates and electric releases.The ‘anti-lock’ design enables the cutter to be released quickly.Uses vertical guides, height and depth stops to ensure precise cutting.Wide range of accessories.Robust construction and precision manufacturing.  Advantages:The morticer can be operated by one person.Doors don’t have to be removed which saves time and money.Increases accuracy and speed of mortice cutting.Can be used on wooden and aluminium doors.Only requires a power drill to work.  Technical details:Max. working depth for mortices: 180 mmMax. working depth for long whole mortices: 1250 mmMax. working depth for small whole mortices: 100 mmMax. thickness of door: all  Requirements for drilling machine or electric screw driver:Chuck: 13 mmRpm: 2000-3000  

For storage of 11 Multipick ELITE picks, 1 extractor and 5 tension toolsYou would like to put some order into your collection of individual ELITE picks or create your personal pick set from our individual picks according to your own requirements? Our high quality leather cases with zip will help to bundle.Dimensions: 68x176x21mm 

Exterior diameter: 5.5 mmInterior diameter: 3.5 mmLength: 250 mm Our universally useable Hobbs Picks are made by hand. Each individual pick is highly precise and unique. Delivery of Hobbs picks may take up to 14 days in some cases!