DRONCO Grinding disc 115 x 1 x 22,23 mm

Now even better – even more secure!Using the new grinding disc holder with our special mini grinding discs for steel every grinder becomes a precious tools for low budged and allows the locksmiths to do precise cutting works. Indispensable for the professional for example with broken locks or bolts, padlock cutting etc. The disc holder is made of steel and assures a very precise true running of the discs even with high rotation. The extremely flat head of the fixing screw allows working very close to obstacles. A rubber ring gives a better grip between screw and grinding disc. The 6 mm diameter in the disc socket guarantees a better centric disc guiding when assembling and consequently avoids oscillating.Security advice: While using this tool you have to wear protection glasses!Very important! Don’t confound this tool with cheap and accident-prone products. The arbor diameter is 10 mm, the shaft diameter 6 mm, appropriate with all standard collet in different grinders. Total length: 68 mm.  

ATTENTION! This cutting disc cannot be mounted on the cutting disc holder MK1 (Art.No.: 63112-1) due to its 10 mm inner diameter! The special mini cutting disc that lets you reach hard to reach places.Manufactured according to EN 12413In accordance with oSaMade in Germany Well suited for thin steel panels used in construction, tools, and high-speed steels (HSS or HS). Features:Measurements: 76x1.4x10 mmRotation Speed: 20,100 rpm 

The special mini cutting disc that lets you reach hard to reach places.Manufactured according to EN 12413In accordance with oSaMade in Germany Well suited for thin steel panels used in construction, tools, and high-speed steels (HSS or HS).Features:Measurements: 2 x 1/25 x 1/4 inch (50 x 1 x 6 mm)Rotation Speed: 30,550 rpm 

The special mini cutting disc that lets you reach hard to reach places.Manufactured according to EN 12413In accordance with oSaMade in Germany Well suited for thin steel panels used in construction, tools, and high-speed steels (HSS or HS).Features:Measurements: 2 x 5/64 x 1/4 inch (50 x 2 x 6 mm)Rotation Speed: 30,550 rpm 

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited.