ELITE Dimple Pin Tension Wrench (BMS-09)

Specially manufactured by ourselves to tackle the unusual properties of dimple pin tumbler locks. Also works with dimple pin cylinders made in the USA. Each individual dimple pin tensioner is made of high-quality spring steel and thus generates highly sensitive feedback. Dimensions:Conical width: 4 – 3.6 mm + 4.0 mmThickness: 1.2 mm A product of Multipick "Made in Germany". 

Specially manufactured by ourselves to tackle the unusual properties of dimple pin tumbler locks. Also works with dimple pin cylinders made in the USA. Each individual dimple pin tensioner is made of high-quality spring steel and thus generates highly sensitive feedback. Dimensions:Width: 2.6 mm + 3.8 mmThickness: 1,2 mm A product of Multipick "Made in Germany". 

Christina Palmer, an expert in the field of locksport from the USA, encouraged us to produce the perfect turners for users in exclusive Multipick quality. We could not resist this wish and wanted to make tensioners the way it should be. Most commercially available tensioners have design flaws such as: The short blade is too short to span standard recessed plugs.The long blade is too long for stable placement in standard recessed plugs.The inside radius of the long blade is too large for flush placement in deep recessed plugs.The width of the blades is too large to also be used in BOK placement.The serrated blade teeth chew up keyways and damage valuable locks.The strain relief holes are a greater stress concentrator than inside corner fillets.The pry bar is double ended, so it does not slide in and out of case pockets easily, and snags and yanks out the other tools stored in the same pocket. We have learned from the mistakes of others and have made use of the knowledge of Chr. Palmer with kind permission! Specifications: Shank length (inner): 2.8 mmShank length (outer): 6.8 mmWidth: 4.0 mmWidth of the shank: 2.3 mmThickness: 0.8 mmTotal length: 76.20 mmWeight: 4.0 g 

Single-sided tension wrench Specifications:Side length (outer) = 14.0 mm / Width = 3.0 mmMaterial thickness = 1.3 mmTotal length = 76.2 mmWidth: 3.0 mm 

Single-sided tension wrench Specifications:Side length (outer) = 13.7 mm / Width = 3.0 mmMaterial thickness = 1.0 mmTotal length = 76.2 mmWidth: 3.0 mm 

 

The new generation of spring loaded round tension ringsA development with high utility value To Pick or manipulate a cylinder, the cylinder core needs to be under gentle tension to be turned. On one hand while working with an electric pick, one mainly favours the possibility of a quick change of the tension direction. On the other hand manual pickers prefer a continuous turning tension in one direction. The new and high precisely produced semi- automatic tension ring TNT-20-V3 simplifies the whole work. The tension to the left and right side can be applicate fine and gentle, thanks to its extravagant production, and enables effortless use, thanks to its handle geometry The TNT-20-V3 is the only tensioner worldwide with the possibility to adapt to various different cylinders due to the quick and tool-less but exact change of the lower tension pin. Exchange pins for straight, left-sided and right-sided curved cylinder profiles are included in delivery.  The TNT-20-V3 is absolutely recommendable for both beginner and professionals, for manual picking and picking with electric picks. Outstanding abilities and improvements compared to the preceding models:Highly precise  fine-mechanic production from Germany (not to be compared with products from Asia or USA)New handle geometry enables sensitive and effortless tension to both sides.Tool-less changing of the tension pins for straight, left-sided and right-sided curved cylinder profiles for optimal and quick adjustment to all types of cylinders. Multipick TNT-20-V3 Intelligent and precise fine-mechanic "Made in Germany" by ©Multipick